Intake Manifold O-ring??????

TWEETER · Mar 30, 2012

Does anyone have the international part number for that o-ring??? Ford wants you to buy a kit with everything in it for the cooler and what not too for 70+ but since I have a delete I don't need *amn everything!!!!

Extended Power · Mar 30, 2012

If you don't have any of the EGR stuff, or if you don't need any water running through the intake anymore...buy a $0.50 3/4" frostplug and pop it into the top of the front cover.

I use silicone around it before installing...then smear some around on the outside to make damn sure it won't leak on you.

TWEETER · Mar 30, 2012

Where do I need to go for one of those??? Ford??

04stroker · Mar 30, 2012

A freeze plug? If that's what your talking about get one at about any parts store. I get mine at napa usually.

TWEETER · Mar 30, 2012

Yea that's what I was talkin about. K thanks!!

G Racing · Mar 30, 2012

I think I have a spare one floating around

TWEETER · Apr 2, 2012

How much you want for it G Racing???? and how fast you think you can get it to me??? Thanks man

G Racing · Apr 2, 2012

TWEETER said:
How much you want for it G Racing???? and how fast you think you can get it to me??? Thanks man

I could over night it.

oke:

G Racing · Apr 2, 2012

If this is the one you need,pay shipping and it's yours. Send me a pm if you want it. Thanks.

Extended Power · Apr 2, 2012

Well thats the donut boring for it.
I like the fact that I can pull the intake off now without draining the coolant. And that there is no coolant at all inside the intake anymore.

dzldoctor · Apr 12, 2012

You can get the intake gasket kit with that oring from napa or oreilleys for about $35

Jarrod B · Oct 18, 2013

yep I need one. this 6.0 has it all torn up for some reason.

02POWERSTROKE7.3 · Oct 18, 2013

Extended Power said:
Well thats the donut boring for it.
I like the fact that I can pull the intake off now without draining the coolant. And that there is no coolant at all inside the intake anymore.

What do you do with the oil cooler?

Extended Power · Oct 19, 2013

That hole is the return for the egr cooler. I don't have one, or anything else that goes along with it.
The oil cooler still gets its coolant, and gets returned straight to the reservoir

Extended Power · Oct 19, 2013

Here is the flow of the coolant.

04cr450 · Oct 19, 2013

Or you can run a heater hose from the oil cooler to the return side of the heater core line. Cut the return line off heater core, insert a 3/4" brass tee and install the hose onto that.

Extended Power · Oct 20, 2013

04cr450 said:
Or you can run a heater hose from the oil cooler to the return side of the heater core line. Cut the return line off heater core, insert a 3/4" brass tee and install the hose onto that.

Show me a picture...that might help clean up the return line running across the top of the engine.

fordfreak4life · Oct 20, 2013

Extended Power said:
Show me a picture...that might help clean up the return line running across the top of the engine.

Pm Steve, he's making a kit to do it

Sent from my SCH-R530X using Tapatalk now Free

04cr450 · Oct 20, 2013

Extended Power said:
Show me a picture...that might help clean up the return line running across the top of the engine.

Im not around my truck at the moment but will this week coming.. Basically run the hose underneath the turb pedestal and 90 degree it after the downpipe, run it along the firewall and tee right into the heater core return line. Don't need a kit made for it ^ lol get blue silicone heater hose if you want to dress it up, couple hose clamps, and a brass tee... Maybe spent 20 bucks top

Extended Power · Oct 20, 2013

My issue is I have my wastegated piping running along where the egr cooler was, and the new up pipes are too tight to run a hose between them and the hpop.