Reply to thread

Message: [QUOTE="mrplowjr_Ez_v, post: 332958, member: 4814"] fairly straight forward once you do it once but here goes: [LIST=1] [*]remove 4 or 6 10mm bolts at the top of the grille [*]lean grille forward enough to reach down to the bottom you will see some slots with metal tabs in them insert a flat head screwdriver to release them. do so carefully as to not break them, your knuckles or the grille. I had a hell of a time finding the clips as they were refered to in the manual. the manual says to insert a screwdriver in the access slats at the bottom of the grille, this was impossible its much easer to reach in from the top. [*]remove grille and set aside. [*]remove 4 10 mm bolts holding in the headlight assembly 1 at the top 2 on the sides and one at the bottom between the bumper and headlight assy. (kind of a bitch to get to) [*]twist CCW the bulb assembly to remove. (Reverse to install new) [*]test the new bulb before putting all that **** back together. [*]reassemble in reverse order and for the love of god don't over-tighten the bolts/screws they are an aggressive thread into a plastic insert. (I may/maynot have one that is stripped) also take note of the old bolt impressions in the plastic so everything lines up right. [/LIST] [/QUOTE]

Verification

Random media

old trucks

New set of gpz's

photo_12_1

20161028_080729

587

Cold_Stack

Truck_2

exc

iphone_pics_021

Latest posts

S
2018 f350 dually advance trac and hill descent unavailable ?
- Latest: Smokin 6.0
- Today at 12:26 AM
6.7 Tech & FAQ
S
6R140 surging issue
- Latest: Smokin 6.0
- Yesterday at 6:40 PM
6.7 Tech & FAQ
B
PMF Traction Bars - Fixed vs Floating
- Latest: Benson1025
- Yesterday at 11:34 AM
Suspension, Drive Train, and Tires
2000 f350 dually lariat
- Latest: ju015dd
- Tuesday at 9:10 PM
7.3 Aftermarket
new build input welcomed
- Latest: btoler4th
- Tuesday at 3:37 PM
6.4 Aftermarket

Members online

Total: 773 (members: 2, guests: 771)

Top