Is my truck lifted?

[03 tx pwr stroke]

OK fellas, I met up with a guy the other day in an 03 with the 7.3. We got to bs'ing and he told me that his truck was lifted/leveled nrunning 305 something 18's. I'm running 285/75/16's and my truck was actually a little taller than his(03 with 6.0). Now all this time, I had been wondering if mine was lifted or not cuz I have pulled up next to several others and some I'm taller and others I'm about the same. I have looked at my springs and whatnot and haven't been able to find any identifying info.

 

[Agjake11]

I'm running 305/55/20's and stock height up front. Don't remember your truck being much taller than mine if any

 

[03 tx pwr stroke]

That's what I'm saying. I've been told it is and I've been told it isn't. Just wondering if there is anything specific I could look at to tell.

 

[Agjake11]

Measure from your fender to the center of the front hub and put a pic up of where you doing it. I'll do the same and other ps can chime in also

 

[DcMoore]

You could just have different coded springs.

 

[K_Hood]

I've wondered the same thing with mine. It is noticeably higher up front, but it's just a 2 spring pack, not the 3+ spring packs that I usually see on peoples trucks with leveling kits. Id like to see how yours sits.

I too am on 285's.

 

[Jeremyleggett07]

I been running 325s x 18 on mine since before my 2.5" blocks.

 

[03 tx pwr stroke]

You could just have different coded springs.

I really don't know anything of the different coded springs. I'll measure and take pics like Jake says and post up in a bit.

 

[03 tx pwr stroke]

I've wondered the same thing with mine. It is noticeably higher up front, but it's just a 2 spring pack, not the 3+ spring packs that I usually see on peoples trucks with leveling kits. Id like to see how yours sits.

I too am on 285's.

This is how she sits. Also, I have 3 springs in front and 6 in the rear.

 

[03 tx pwr stroke]

I measured from the bottom of the wheel well opening to the center of the hub, both front and rear. The pics are a little off cuz the camera is angled wrong, but the measurements are 26 3/4" rear and 25 3/8" front. First ones are the rear and the last 2 are the front.

 

[Agjake11]

I'll measure when I get back to the truck but to start I only have 2 leafs up front.

 

[ToMang07]

If you have 3 leafs up front chances are you just have a leveling kit. (Add-a-leaf.)

 

[Agjake11]

my rough measurements put the rear at about 25 3/4" so about 1 inch shorter (i have 1" rear block instead of 2" stock) and the front was under 24". ill try and get better more accurate numbers later today

 

[Dave]

Could be any number of things.

Different GVWR packages, Snow plow prep.

 

[ToMang07]

Could be any number of things.

Different GVWR packages, Snow plow prep.

Snow plow prep is X-Code springs. Still 2 leafs up front. I don't believe there is any OEM front leaf springs that have 3 leafs.

 

[DC@Special]

I agree that a 3 leaf pack up front sounds like an AAL. Stock springs would only be 2 as mentioned.

 

[K_Hood]

This is all confusing me lol.

Mine measures roughly 26-3/4" up front from the center of the hub to the fender and mine only has 2 leaf springs up front.

27-1/2" in the back with 6 total springs

:shrug:

 

[03 tx pwr stroke]

I just met a guy with a bone stock 03 f350. I sit a good 3-4 inches higher up front and probably 2 inches in the rear.

 

[Agjake11]

This is all confusing me lol.

Mine measures roughly 26-3/4" up front from the center of the hub to the fender and mine only has 2 leaf springs up front.

27-1/2" in the back with 6 total springs

:shrug:

are you counting the overload in the 6?

 

[Agjake11]

I just met a guy with a bone stock 03 f350. I sit a good 3-4 inches higher up front and probably 2 inches in the rear.

same size tires?