Finally making one, been taking pics since I started repairing my cab. There will be tons of pics in the beginning, but It'll get slower lol
End game is a desert truck that will go anywhere, plans are below
-Carli lift kit in the 4.5in size(waiting for their new kits to come out to see what I go with)
- Roll Cage
- Rear locker
- convert rear axle to a 2008 (Front axle is already converted to a 2007 axle)
- move rear hanger forward to accept 2008+ rear springs
- install my Warn 12k winch
- Install my VisionX 40in bar on the front bumper
- Rock sliders
- belly skid to protect the oil pan, Trans, Etc
- Cut the back of the bed Baja style and rear tube bumper for a better approach angle
- Rear tire gate to hold two 37in tires
- 2007 front head lights and retro fit projectors
- On board air
- And I'm sure there will be more
Motor/ Trans Wise
-Trans is getting installed in a couple of weeks, builder is waiting on the billet input shaft
Trans build will consist of a Road runner Triple disk converter, billet input shaft, and all the usual internal stuff
-250/100 or 250/200 hybrids
-T4 mount turbo or modded h2e
- valve springs, pushrods, and studs
-17degree HPOP or upgrade to a T500
-Driven Diesel Reg Return
-Driven Diesel Bosch Dual fuel pumps and sump
-nitrous(always wanted it lol) and for desert runs or sand drags, why not)
-Red head steering box or just put full hydro
- and I'm sure I am missing things
On to the Pics!
Before I wrecked it
Offroad carnage from a trail run ( went a bit too fast in the whoops)
A Week Before I Wrecked it
Pics after I Jack knifed with my goose neck dump trailer
On to the start of the repairs
Bed removed and starting to cut the cab
new cab side and doors installed, starting to look good again!
Whole truck getting ready for paint
Bed painted
truck in the booth for paint
painted!
I figured paint the frame while the bed is off
Had them Bed line it
Day I picked it up from the body shop
Decided to give it a deep cleaning since I never did it on this truck, took advantage to reroute my sub wires and amp wires. Also Installed a front body mount.
Don't Hate on my seat LOL
Whole interior in my garage
And as it sits now!
More coming soon
End game is a desert truck that will go anywhere, plans are below
-Carli lift kit in the 4.5in size(waiting for their new kits to come out to see what I go with)
- Roll Cage
- Rear locker
- convert rear axle to a 2008 (Front axle is already converted to a 2007 axle)
- move rear hanger forward to accept 2008+ rear springs
- install my Warn 12k winch
- Install my VisionX 40in bar on the front bumper
- Rock sliders
- belly skid to protect the oil pan, Trans, Etc
- Cut the back of the bed Baja style and rear tube bumper for a better approach angle
- Rear tire gate to hold two 37in tires
- 2007 front head lights and retro fit projectors
- On board air
- And I'm sure there will be more
Motor/ Trans Wise
-Trans is getting installed in a couple of weeks, builder is waiting on the billet input shaft
Trans build will consist of a Road runner Triple disk converter, billet input shaft, and all the usual internal stuff
-250/100 or 250/200 hybrids
-T4 mount turbo or modded h2e
- valve springs, pushrods, and studs
-17degree HPOP or upgrade to a T500
-Driven Diesel Reg Return
-Driven Diesel Bosch Dual fuel pumps and sump
-nitrous(always wanted it lol) and for desert runs or sand drags, why not)
-Red head steering box or just put full hydro
- and I'm sure I am missing things
On to the Pics!
Before I wrecked it
Offroad carnage from a trail run ( went a bit too fast in the whoops)
A Week Before I Wrecked it
Pics after I Jack knifed with my goose neck dump trailer
On to the start of the repairs
Bed removed and starting to cut the cab
new cab side and doors installed, starting to look good again!
Whole truck getting ready for paint
Bed painted
truck in the booth for paint
painted!
I figured paint the frame while the bed is off
Had them Bed line it
Day I picked it up from the body shop
Decided to give it a deep cleaning since I never did it on this truck, took advantage to reroute my sub wires and amp wires. Also Installed a front body mount.
Don't Hate on my seat LOL
Whole interior in my garage
And as it sits now!
More coming soon