2000f350
New member
Started my 7.3 build. Pulled the v10 motor/trans over the weekend. And ordered tons of parts. I'm putting in a IH 7.3 from a school bus. Ordered new oil pickup, oil pan, oil cooler, and morosos one piece rubber/metal oil pan gasket. I have a complete engine and dash harness from a 2003 7.3 truck. Along with the fuse box acc brackets. Hopefully if all my parts come in by the weekend I can put the motor in and start rewiring the truck. Anyone here done this? If so any tips/tricks on the wiring? I was gonna start with the engine side, and see if I need the dash side. The 7.3 is out of an 02 bus but uses a mechanical fuel pump. I'm going to stick with that for now as it was replaced shortly before I bought the motor. I'm also going to use the ps pump from the bus which is mounted above the fuel pump in the vallley and is gear driven.
Thanks
Josh
Thanks
Josh