LED light bars

SixFourStrokin · Mar 6, 2014

how many of you guy are using led light bars, where are they mounted, what brands do you have and what do you think about them. i just ordered a 30'' and a 12''. the 30 will be mounted in the bottom part of the grille behind the billit inserts and the 12 will be in the middle of the bumper behind the inserts. any ideas on how to mount?

:fordoval:

SixFourStrokin · Mar 6, 2014

this is what the front of my truck looks like so you get the idea

Clifford_6.4 · Mar 6, 2014

http://powerstrokearmy.com/forums/showthread.php?t=46797

when you get the bars mounted post some pictures im thinking of doing the same.

Sent from a little green goblin under a bridge.

SixFourStrokin · Mar 6, 2014

thanks man that helps with ideas on how to do it. im still not sure if im gonna be able to do it and leave the inserts in. im just not sure if there will be enough room but im gonna try like hell. i just think it will look a lot more clean

Clifford_6.4 · Mar 7, 2014

True. Good luck!

Sent from a little green goblin under a bridge.

CT9AIX · Mar 7, 2014

Mine is from StrobesNMore.com and is 24" long. I order all our company stuff from there and everything they make is top notch and holds up very well.

Musclemckeester · Mar 7, 2014

You can fit a 20" in the bumper easy. There is enough room you can pretty much put it however far back you need to fit

AirFishAutomotive · Mar 7, 2014

I have 21 inch bars I believe in my bumper. Have had had good ones and now cheap ones. They all seem to work well.

johnp115 · Mar 7, 2014

How about a night shot looking down the road with a 20 in the bumper on? i wanna see how it projects being low to the ground. Thanks.

Lugger007 · Mar 7, 2014

I have three light bars from strobes n more. Very bright and great quality.

2 - 7" lights in frount bumper

One 14" light on the rear rack, really useful

Sent from my iPhone using Tapatalk

GatorBaitR6 · Mar 8, 2014

Will a 30" fit in the bottom grille

Sent from my SAMSUNG-SGH-I337 using Tapatalk

forcefed6.4ford · Mar 8, 2014

In the bumper? No.

GatorBaitR6 · Mar 8, 2014

Thought biggest u could fit in there is 20"... is that correct

Sent from my SAMSUNG-SGH-I337 using Tapatalk

Lugger007 · Mar 8, 2014

A 20" will deaf fit in lower portion of grille. I'm away for a few days but ill measure when I get home end of wk if a 30 would fit. It might, would be tight.

Sent from my iPhone using Tapatalk

Musclemckeester · Mar 11, 2014

johnp115 said:
How about a night shot looking down the road with a 20 in the bumper on? i wanna see how it projects being low to the ground. Thanks.

This is 20" lightbar only holding the camera in the exact same position.

bigaF250 · Mar 11, 2014

Have two 4s and a 20 in front bumper. Considering making an eyelid for my 20 so I can run it while on the road. Pisses way to many people off

Sent from my SCH-I545 using Tapatalk

SixFourStrokin · Mar 12, 2014

Musclemckeester said:
You can fit a 20" in the bumper easy. There is enough room you can pretty much put it however far back you need to fit

i figured the 12 inch would fit there im just worried about the one going in the grille

SixFourStrokin · Mar 12, 2014

GatorBaitR6 said:
Thought biggest u could fit in there is 20"... is that correct

Sent from my SAMSUNG-SGH-I337 using Tapatalk

im pretty sure you cant go bigger than a 20 in the bumper. i measured mine. and 30 is the biggest you can go in the grille

GROSSpolluter · Mar 21, 2014

off

On
20" rigid

Sent from my SM-N900P using Tapatalk

SixFourStrokin · Mar 25, 2014

finally got my light bars in. i hooked the 30'' up just to see how bright it was

second picture is with just the light bar. third picture on top is just my hids and the bottom is hids and light bar. pictures are crappy they were with my phone