Sorry you feel embarrassed, no grown man should feel that way. Sorry we did not weld on the inside of the pipe, Sorry there are no instructions. Its a pretty simple install.
Step 1. unplug sensor
Step 2. loosen stock clamps
Step 3. Remove stock pipe
Step 4. Install new pipe
Step 5. Tighten clamps
Step 6. plug sensor back into connector ( we do not run the stock IAT in the pipe)
And to respond to your buddies comment of us still using the stock elbow, we upgraded the part that blows out.
Also onto the issue of your no-limit intake.....if the support doesn't match up exactly, you can bend the metal to make it fit.
Each and every single one of these trucks are different....We had the same turbo kit not fit 3 different trucks, We then noticed that on the cab mounts there is almost 1" of play in either direction on the bolt hole....We had issues with the CAC pipe hitting the cab, so we had to shift the cab.....We also had issues with our intake piping hitting the dual fuelers, again we had to shift the cab
Yes you bought a part to fit your year and model truck but not everything lines up perfectly.
and also I have never purchased a TV and looked for the instructions