Reply to thread

Message: [QUOTE="SEABEE08FX4, post: 1157053, member: 56"] I've been running mine still hooked up for over 226k miles no issues. But no EGR hooked up, so no EGR CCV is no problem as is hooked to the intake. If you're not that low on oil its probably a small leak, if you want to verify its the turbo seal do this. Disconnect the down pipe and feel around inside the pipe and inside of the turbine outlet, check and see if its oily. If it is you got a bad oil seal. Could be a few other potential leaks as well but by the time they made it that far they would have been pretty much vaporized so not so likely as just and oil seal and right at the source. [/QUOTE]

Verification

Random media

IMAG0570

he451ve compressor inducer

vajj

DA73B779-98BC-426F-8EEB-8BEE927595C9

MSGR_PHOTO_FOR_UPLOAD_1536756969632_jpg_1536756974447

95_Bronco_conversion_pics_006

eleanor_at_dereks_5_

2011-11-20_12-57-40_303

IMG_20181201_214559

IMAG0072

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

Total: 281 (members: 3, guests: 278)

Top