Ive got my MAF connector apart and am doing some testing. I have come across that pin 5 has voltage, about 4.9v on it with KOEO. Testing says there is to be NO voltage here, and if voltage is found, repair the short to power. If I ohm out to pin 2 & 3 to pin 5 I get continuity. But if I unplug the connector at the PCM, that all goes away.
Can anybody else tell me if their seeing voltage on pin 5 with KOEO and sensor unplugged?
Can anybody else tell me if their seeing voltage on pin 5 with KOEO and sensor unplugged?