TooMuch03
New member
I am finishing up my compounds and have quite a bit of left over pipe that a person could use to make their own up-pipes, CAC tubes or compounds. I have aluminum and Stainless pipes, as well as some turbo flanges and used exhaust parts.
6061 16 gauge Aluminum
2- 3' straight sections, 3.0" OD
1- 2' straight section, 3.0" OD
3- 90* Elbows, 3.0" OD
6061 14 gauge Aluminum
1- 90* Elbow, 5.0" OD
T304 16 gauge Stainless
2- 3' Straight sections, 2.0" OD
1- 90* Elbow, 2.0" OD
1- 45* Elbow, 3.5" OD
1-4.21" Marmon flange (fits stock 6.0 turbo and most S300 turbos) with V-band clamp.
Also have T304, 1/2" thick T6 open turbo flange and T304 1/8" NPT EGT bung, and a few various silicon boots, including a 3" to 4" reducer.
Some used parts that I have are a 4" 6.0 downpipe, alumanized, about 10 months old, stainless 4" silverline muffler, and 4" to 5" silverline double-walled tip.
Make offers on anything.
6061 16 gauge Aluminum
2- 3' straight sections, 3.0" OD
1- 2' straight section, 3.0" OD
3- 90* Elbows, 3.0" OD
6061 14 gauge Aluminum
1- 90* Elbow, 5.0" OD
T304 16 gauge Stainless
2- 3' Straight sections, 2.0" OD
1- 90* Elbow, 2.0" OD
1- 45* Elbow, 3.5" OD
1-4.21" Marmon flange (fits stock 6.0 turbo and most S300 turbos) with V-band clamp.
Also have T304, 1/2" thick T6 open turbo flange and T304 1/8" NPT EGT bung, and a few various silicon boots, including a 3" to 4" reducer.
Some used parts that I have are a 4" 6.0 downpipe, alumanized, about 10 months old, stainless 4" silverline muffler, and 4" to 5" silverline double-walled tip.
Make offers on anything.