Reply to thread

Message: [QUOTE="Matt_P, post: 407076, member: 277"] Well hows it coming? Lol[/QUOTE] Well I got to the shop, put the new ps/vacuum pump and new hyrdroboost line on and fire it up and no leaks! So I put it in drive and reverse and filled the trans up the rest of the way. Then me and Bryan went out for a test drive. First round I blew the IC boot off the cold side and it was torn. Put a new boot on and went for the 2nd round. Unfortunately the trans is stuck in limp mode in 3rd gear. I have manual 2nd then 3rd but thats it, obviously I screwed something up in the wiring. The truck is a turd right now too. I build 35psi of boost in 3rd gear and it clears up but doesnt pull hard at all. Its smokey as hell too trying to build boost and gets hot quick. The oil pressure though sits at 40psi at idle and 75 at full throttle and coolant temp sits at 180 so all good there. Powersteering works great too. Unfortunately I have some bugs to fix though but I was pumped to drive it down the road for the first time tonight! It also needs the idle bumped up some so I dont have to 2 foot it without stalling out. So I have some bugs to work out but it was a succesful today, I have some vids Ill upload tomorrow [/QUOTE]

Verification

Random media

Coolant Filter

Alexis

eleanor_part_two_45_

Screen_shot_2012-01-29_at_8_37_29_AM

uploadfromtaptalk1320025351052

Screenshot_2015-02-09-15-10-15

New grille

100904_132309

Photo0126_1_

Split_tractor

20140613_085114

Latest posts

Gauge cluster face plates
- Latest: crash86
- Yesterday at 5:15 PM
6.0 Aftermarket
B
6.4 head gasket job cost
- Latest: bowhunter
- Yesterday at 2:07 PM
6.4 Aftermarket
S
6R140 surging issue
- Latest: Smokin 6.0
- Yesterday at 12:11 AM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Jun 6, 2025
Engine and Drivetrain

Members online

Gregoryjak

Total: 311 (members: 2, guests: 309)

Top