DMDP
New member
Well a guy brought over a 01 ex. With a 7.3 in it with starting issues. He said randomly, it will just crank and crank and won't start. Someone told him to break the valve open on the fuel bowl and let it drain for a couple seconds and then try. He said that's the only way he got it to start both times it happened.
So now I got it here and of course, past 2 days, no problems at all. But this morning, she just cranked. I noticed the tach was not moving, so I started thinking cps. But then after like 15 sec of cranking it came up to around 200rpms bit still no start. Gave the starter a break, then started cranking again. No Rpms at all for like 10 seconds then it just started. I'm gonna go out and put scan tool on it and see if it's got any codes
What you guys think
So now I got it here and of course, past 2 days, no problems at all. But this morning, she just cranked. I noticed the tach was not moving, so I started thinking cps. But then after like 15 sec of cranking it came up to around 200rpms bit still no start. Gave the starter a break, then started cranking again. No Rpms at all for like 10 seconds then it just started. I'm gonna go out and put scan tool on it and see if it's got any codes
What you guys think