psduser1
Well-known member
Alright guys, this thread will list the parts I have left after parting my 01 pickup.
Aluminum endtank intercooler, all cleaned, ready to install $200
Used waterpump, worked fine when pulled, no leaks, drips etc $50
SD manifolds, no cracks, serviceable, but rusty of course $50
Hydroboost unit, worked just fine when pulled $50
Radiator $50
Uppipes, collector, deleted pedistal, $150, can pull plenums, and add intercooler piping are available for a dollars more.
Rebuilt oilcooler $125
Wiring harness, door panels, switches for power window conversion $150
Set of cablights, with wire harness $50
All lights and bases are solid, not cracked or anything
Front driveshaft, for zf6, which is longer than the automatic version, needs the cardan joint rebuilt $50
I'm next door to dts, if you want the driveshaft ready to boltin, I can get a price from them.
Zf6, with transfercase, and a serviceable, used, single mass clutch $1600
nice, tight, case, I think it shifted better than my reman, lol.
Eight foot aluminum flatbed, for srw. With front bulkhead, and a small hole in the front, where the dumba $$ po had stacks on it $1500
Two sets of 10.5/dana 50 axles. Both are 3.73, one needs bearings and ball joints, the other has relatively new ball joints (less than 10k) $500, and $700, respectively.
Also have a 95 model, dual wheel, 10.25 axle, with 4.10 gears and a maghytec cover. Complete, drum to drum, with newish (less than 5k miles) brakes, including the drums $300
The cab and frame is gone, so most everything listed is what's left, although I'm sure there is a few other odds and ends. Don't hesitate to ask.
I can text pics way easier than posting them all here, at five one 7, 2o4, 5 99 four. I have paypal setup, and will ship any of this on your dime. The bigger stuff, I'm willing to drive and meet, within an hour or two. I am willing to negotiate on the price, a little, but I feel most of this stuff is priced pretty reasonably.
I'd be willing to trade for a couple things, I'd like to find a decent 38r, scan gauge or cts. Looking for a decent set of 18 or 20x10 rims, for an 03 excursion.
Aluminum endtank intercooler, all cleaned, ready to install $200
Used waterpump, worked fine when pulled, no leaks, drips etc $50
SD manifolds, no cracks, serviceable, but rusty of course $50
Hydroboost unit, worked just fine when pulled $50
Radiator $50
Uppipes, collector, deleted pedistal, $150, can pull plenums, and add intercooler piping are available for a dollars more.
Rebuilt oilcooler $125
Wiring harness, door panels, switches for power window conversion $150
Set of cablights, with wire harness $50
All lights and bases are solid, not cracked or anything
Front driveshaft, for zf6, which is longer than the automatic version, needs the cardan joint rebuilt $50
I'm next door to dts, if you want the driveshaft ready to boltin, I can get a price from them.
Zf6, with transfercase, and a serviceable, used, single mass clutch $1600
nice, tight, case, I think it shifted better than my reman, lol.
Eight foot aluminum flatbed, for srw. With front bulkhead, and a small hole in the front, where the dumba $$ po had stacks on it $1500
Two sets of 10.5/dana 50 axles. Both are 3.73, one needs bearings and ball joints, the other has relatively new ball joints (less than 10k) $500, and $700, respectively.
Also have a 95 model, dual wheel, 10.25 axle, with 4.10 gears and a maghytec cover. Complete, drum to drum, with newish (less than 5k miles) brakes, including the drums $300
The cab and frame is gone, so most everything listed is what's left, although I'm sure there is a few other odds and ends. Don't hesitate to ask.
I can text pics way easier than posting them all here, at five one 7, 2o4, 5 99 four. I have paypal setup, and will ship any of this on your dime. The bigger stuff, I'm willing to drive and meet, within an hour or two. I am willing to negotiate on the price, a little, but I feel most of this stuff is priced pretty reasonably.
I'd be willing to trade for a couple things, I'd like to find a decent 38r, scan gauge or cts. Looking for a decent set of 18 or 20x10 rims, for an 03 excursion.
