Steering loose on 2006 after lowering from 6" lift w/ 37's to 3" lift w/ 35's

[6.0_Nutter]

Steering loose on 2006 after lowering from 6" lift w/ 37's to 3" lift w/ 35's

Looking for some insight here. I just lowered my truck down from a 6" to 3" lift and the steering feels way different. It's not loose in the wheel but it feels like it takes an extra 1/2 turn to get the wheels where I need them to be turned. I haven't gotten an alignment or anything yet since I just did the swap but thought I would look for some advice from anyone on PSA who could help. Thanks in advance!!!

 

[6.0 Tech]

Check the pitman arm nut on the gear box.

 

[6.0_Nutter]

Will do. I've read some other threads about tightening the allen on the gear box as well. I'll look into both tomorrow. Thanks for the help. :thumbup:

 

[6.0 Tech]

Be careful adjusting the box, if you go too tight its ***ked...