Stock Chrome Wheels

[militant83]

I have a set of stock chrome wheels that came off of my 06 F250. They come mounted and balanced with Kelly Safari ATR tires. The tires have about 95% or better tread left. $400 Located in Circleville, OH Would make a good set of winter wheels.

Email [email protected] if interested, I'm rarely on here anymore.

 

[militant83]

open to any offers

 

[benjamindurtka]

Bolt pattern? Is it the same on all 06? Trying to see if they will fit my 01.

2001 F-250 cclb
7.3l 4x4
forged rods,
ebpv, muffler, dp80hp dd.

 

[sootie]

Bolt pattern? Is it the same on all 06? Trying to see if they will fit my 01.

2001 F-250 cclb
7.3l 4x4
forged rods,
ebpv, muffler, dp80hp dd.

they will fit your 01 as all super dutys are 8x170 from 99-current. offset is less as 05+ axles are wider.

 

[benjamindurtka]

Enough to be a problem with the offset?

2001 F-250 cclb
7.3l 4x4
forged rods,
ebpv, muffler, dp80hp dd.

 

[rosspulliam]

You'll need 1.5" spacers to make an 05+ wheel fit a 2001 I believe.

 

[benjamindurtka]

Thanks. Need tires and my rims are pretty pitted. These would be nice until I can get aftermarket.

2001 F-250 cclb
7.3l 4x4
forged rods,
ebpv, muffler, dp80hp dd.

 

[sootie]

You'll need 1.5" spacers to make an 05+ wheel fit a 2001 I believe.

Why? they fit fine depending on tire size. if you put a larger than factory tire on there, it may rub the leafs at full lock.

 

[benjamindurtka]

So no spacers if I keep them stock? Is there a third party to settle this? Lol

2001 F-250 cclb
7.3l 4x4
forged rods,
ebpv, muffler, dp80hp dd.

 

[sootie]

So no spacers if I keep them stock? Is there a third party to settle this? Lol

2001 F-250 cclb
7.3l 4x4
forged rods,
ebpv, muffler, dp80hp dd.

Not sure what needs to be settled, i've done this myself multiple times.

like I said, the 99-04 axles are narrower so the wheels will sit a little more tucked under the body. if the tires are larger than stock, they may rub the leafs on full lock. nothing to extreme if you know it will happen and dont crank too tight.

if you want the same position in your fender, use 1.5" wheel spacers but that will involve cutting your studs and you will forever have the risk of losing a wheel due to spacers.

 

[rosspulliam]

Not sure what needs to be settled, i've done this myself multiple times.

like I said, the 99-04 axles are narrower so the wheels will sit a little more tucked under the body. if the tires are larger than stock, they may rub the leafs on full lock. nothing to extreme if you know it will happen and dont crank too tight.

if you want the same position in your fender, use 1.5" wheel spacers but that will involve cutting your studs and you will forever have the risk of losing a wheel due to spacers.

He's technically right, you can run them as is with potential rubbing. 1.5" under the fenders is tucked pretty far. Most people I've talked to don't like it. I tried it, I didn't like it. They were tucked too far. And I like my wheels tucked! Negative offset, in my opinion, is the dumbest idea in the history of wheels.

Sootie is the first person that I've heard of that has ran them without spacers and actually liked how they looked.

 

[sootie]

He's technically right, you can run them as is with potential rubbing. 1.5" under the fenders is tucked pretty far. Most people I've talked to don't like it. I tried it, I didn't like it. They were tucked too far. And I like my wheels tucked! Negative offset, in my opinion, is the dumbest idea in the history of wheels.

Sootie is the first person that I've heard of that has ran them without spacers and actually liked how they looked.

never said i liked it, i said it would work.

 

[rosspulliam]

never said i liked it, i said it would work.

Hah! It will in fact work.

 

[benjamindurtka]

I don't think he has them anymore anyway. No response.

2001 F-250 cclb
7.3l 4x4
forged rods,
ebpv, muffler, dp80hp dd.

 

[rosspulliam]

I don't think he has them anymore anyway. No response.

2001 F-250 cclb
7.3l 4x4
forged rods,
ebpv, muffler, dp80hp dd.

You can find take offs on Craigslist all day long without any problem.

 

[benjamindurtka]

This was interesting.... Lol. Thanks though. I think I saw a truck the other day with 05+ wheels on an older truck..looked really dumb..I would have to get spacers. Apparently I have to be careful what kind I get.

2001 F-250 cclb
7.3l 4x4
forged rods,
ebpv, muffler, dp80hp dd.

 

[rosspulliam]

Anything 99-04 would work just fine with no spacers. 05+ is when they widened the axles and changed wheel offset. Maybe post a WTB? Where are you located?

 

[benjamindurtka]

Detroit mi.
Westland more specifically.

2001 F-250 cclb
7.3l 4x4
forged rods,
ebpv, muffler, dp80hp dd.

 

[Lipka101]

With 1.5 spacers you do not need to cut the studs. I think 1.25 is the borderline.

Sent from my SAMSUNG-SM-G890A using Tapatalk