Stock Height F350 pics?

LovinPSDs · Jun 19, 2014

do 35's work on a 350 with stock coils and 250 block? I figure that would remove the rake for the most part and keep me at stock height. (instead of leveling the front up to match)

On edit.. I can't remember what the rake even looks like, or how drastic is is, but in bows08 it looks extremely noticeable.

I gotta shrink my truck...

Jeff@Spartan · Jun 19, 2014

LovinPSDs said:
do 35's work on a 350 with stock coils and 250 block? I figure that would remove the rake for the most part and keep me at stock height. (instead of leveling the front up to match)

On edit.. I can't remember what the rake even looks like, or how drastic is is, but in bows08 it looks extremely noticeable.

I gotta shrink my truck...

I ran 35" Toyo MT's on 20x10's with -19mm offset with very little fender liner rub on my 08 F-250 at stock height.

LovinPSDs · Jun 19, 2014

Thanks Jeff, looked great! I'll be going to Toyo AT2's 35x12.50x18's or a very close and slightly more narrow metric version here soon. I'll be sure to put some pictures up when I do.

Moma's had enough of climbing into the truck with 4.5" and 37s.. And it doesn't fit in my work parking garage.

Jeff@Spartan · Jun 19, 2014

LovinPSDs said:
Thanks Jeff, looked great! I'll be going to Toyo AT2's 35x12.50x18's or a very close and slightly more narrow metric version here soon. I'll be sure to put some pictures up when I do.

Moma's had enough of climbing into the truck with 4.5" and 37s.. And it doesn't fit in my work parking garage.

Yeah, that was probably my favorite setup now that I think about it. Aggressive look and it was easy.

RSK · Jun 20, 2014

SPARTAN said:
I ran 35" Toyo MT's on 20x10's with -19mm offset with very little fender liner rub on my 08 F-250 at stock height.

That looks so nice, i think i'm getting over the whole street tires on a truck thing and will be on 35's by the end of the summer.

RedRice589 · Jun 20, 2014

RSK said:
That looks so nice, i think i'm getting over the whole street tires on a truck thing and will be on 35's by the end of the summer.

I got the same way. It was nice but it's hard to not have an m/t. I think I'd like at least a 305/55/20 at with a 20x12 at stock height like Randall has will work best for me.

dmistak617 · Jun 21, 2014

Well I pulled the trigger and ordered the wheels and tires... Ended up going with 20x12 moto metals and 33" federal couragias.. They said I'll have to pay shipping if they don't fit.. Only time will tell..

Sent from my iPhone using Tapatalk

bft blue oval boys · Jun 21, 2014

dmistak617 said:
Well I pulled the trigger and ordered the wheels and tires... Ended up going with 20x12 moto metals and 33" federal couragias.. They said I'll have to pay shipping if they don't fit.. Only time will tell..

Sent from my iPhone using Tapatalk

They'll fit. Post pics when you get them!

Sent from a Cummins plant, driving a Powerstroke, with a TDI on the side!

dmistak617 · Jun 21, 2014

bft blue oval boys said:
They'll fit. Post pics when you get them!

Sent from a Cummins plant, driving a Powerstroke, with a TDI on the side!

Will do!

Sent from my iPhone using Tapatalk

powerstroked08 · Jun 21, 2014

dmistak617 said:
Well I pulled the trigger and ordered the wheels and tires... Ended up going with 20x12 moto metals and 33" federal couragias.. They said I'll have to pay shipping if they don't fit.. Only time will tell..

Sent from my iPhone using Tapatalk

I have the federals on my truck(35-12.5-20 on 0 offset wheels) and they have been a good tire. Other than a few burnouts that really took some life away, they have done well. And you can't beat the price! Oh and I only had to zip tie the inner fender back some for them to clear.

TyCorr · Jun 21, 2014

Cant you use a heat gun on those and reform the areas that rub instead of the ziptie?

powerstroked08 · Jun 22, 2014

You probably could. Its only the inner maybe 1" on the driverside inner fender that needs pulled back. So I don't know why you couldn't reform it to clear.

Stroked777 · Jun 22, 2014

SPARTAN said:
I ran 35" Toyo MT's on 20x10's with -19mm offset with very little fender liner rub on my 08 F-250 at stock height.

How many miles you get out of you toyo mts?

Jeff@Spartan · Jun 22, 2014

Stroked777 said:
How many miles you get out of you toyo mts?

Don't know. I sold them well before they really started wearing. They were wearing really well though. They wear fast initially but they get to a certain point after a few thousand miles where they slow down on the wear.

dmistak617 · Jul 1, 2014

bft blue oval boys said:
They'll fit. Post pics when you get them!

Sent from a Cummins plant, driving a Powerstroke, with a TDI on the side!

Here you go... They couldn't believe it.. Ended up getting fuel octanes

Sent from my iPhone using Tapatalk

bft blue oval boys · Jul 1, 2014

dmistak617 said:
Here you go... They couldn't believe it.. Ended up getting fuel octaneshttp://img.tapatalk.com/d/14/07/02/my5uju9e.jpg][IMG]http://img.tapatalk.com/d/14/07/02/y5uvamyb.jpg][IMG]http://img.tapatalk.com/d/14/07/02/y9u3eva3.jpg

Sent from my iPhone using Tapatalk[/QUOTE]

Hell yes, looks great! Should have got a picture of their faces lol. What did they think of the look?

dmistak617 · Jul 1, 2014

bft blue oval boys said:
Hell yes, looks great! Should have got a picture of their faces lol. What did they think of the look?

They liked it! But yeah the main guy kept telling me it wouldn't fit and then asked when they test fitted the rim if I want them to mount it, and if I say yes they can't send it back... So I went for it. He called all the businesses that told him they wouldn't fit and said that they changed their notes that it will fit.. Pretty funny.

Sent from my iPhone using Tapatalk

bft blue oval boys · Jul 1, 2014

dmistak617 said:
They liked it! But yeah the main guy kept telling me it wouldn't fit and then asked when they test fitted the rim if I want them to mount it, and if I say yes they can't send it back... So I went for it. He called all the businesses that told him they wouldn't fit and said that they changed their notes that it will fit.. Pretty funny.

Sent from my iPhone using Tapatalk

Awesome! Lol