PSD-BLACK-CLOUD
Active member
How wide of a tire can I put on stock wheels till I can get aftermarket wheels? Will a 13.50 work?
Stock wheels and bigger tires
- Thread starter PSD-BLACK-CLOUD
- Start date
036.0l
New member
- Joined
- Oct 11, 2011
- Messages
- 110
- Reaction score
- 0
I have a set of 37/13.5/16s on my stock dually rims right now. No unusual wear so for. Have about 1500 mi on them.
Sent from somewhere, somehow.
Sent from somewhere, somehow.
Manytoys
New member
How wide of a spacer are you using and how much gap between the tires? I'm looking at getting some 35/12.5/17's toyo MT's soon but am concerned with the width on my 12 F450 6.75" rims.
PSD-BLACK-CLOUD
Active member
Sweet I was woried about them being to wide to sit on the rim. I wonder If I am going to need to run a spacer to push them out from the frame........
dirtflinger92
New member
Do you have any pics?
HOOV3R
New member
13.5 in what size 35, 37? On what size wheel 20? You'll be able to get away with it better on a smaller wheel, or with a larger tire. It all depends on what your going to run.
PSD-BLACK-CLOUD
Active member
37 13.50 on stock 17's
Then when those are gone back to 20's
Then when those are gone back to 20's
TexasA&M
New member
What is the best way to figure out the optimal PSI? I'm getting ready to put 325/60 tires on my stock 20" rims. This babies are expensive, so I want to make sure that they wear evenly!!
PSD-BLACK-CLOUD
Active member
I ran that set up no problem on my old truck. No wear issues at all.
TexasA&M
New member
Good deal! What PSI did you run in them most of the time?
PSD-BLACK-CLOUD
Active member
Around 50psi they beat you to death any higher.
6.4psd916
New member
I ran 33x13.5 on factory 05 18's, no issues. Use chalk to get the psi right. Mark the tire and drive straight a few tire turns, let pressure out till it wears straight across the pattern.
