Tire size with no lift.

Cdills · Sep 15, 2012

I have a 2009 F350 with no lift. What is the largest tire I can get on the truck with no lift.
I'm going to lift it later on as I get the money saved to do it. At the moment I just want to put some bigger tires on it. What do you recomend? :rockon:

forcefed6.4ford · Sep 15, 2012

35x12.5 with a little trimming of the inner rear fender well to prevent rubbing at full lock.

STROKIN N STYLE · Sep 15, 2012

^^^ 35's fit. Mine rub at full lock. You can pull the inner fender back to prevent it

sent from somewhere in the country

rc4wd · Sep 15, 2012

I've seen several sets of 35's and a couple sets o 325's around here with just a leveling kit.

Jeff@Spartan · Sep 15, 2012

Factory wheels?

rc4wd · Sep 15, 2012

Yes all on factory wheels

Jeff@Spartan · Sep 15, 2012

I was asking the OP. Sorry, should have quoted.

rc4wd · Sep 15, 2012

O ok my bad

madman1234509 · Sep 15, 2012

I think ive seen one or two people stuff 37s under a stock truck. Im not really sure how it worked out or if it did at all. I personally wouldnt do it and think 35s look good with a stock truck and with a leveled.

Rene G · Sep 15, 2012

35x12.50 or 35x13.50 are the biggest I've run stock. The 13.50's rubbed a bit at full lock.

David S. · Sep 15, 2012

Rene G said:
35x12.50 or 35x13.50 are the biggest I've run stock. The 13.50's rubbed a bit at full lock.

do you have any pics of the 13.50 on your truck?

Rene G · Sep 15, 2012

I don't have any pics, it was on my old 05. If I run across any pics I'll post them.

powerstrokin15 · Sep 15, 2012

35/12.50s 20x10. stock height

ImageUploadedByTapatalk1347741295.711427.jpg

Eric@HolderdownPerformance

STROKIN N STYLE · Sep 15, 2012

Copycat

sent from somewhere in the country

powerstrokin15 · Sep 15, 2012

STROKIN N STYLE said:
Copycat

sent from somewhere in the country

you copied me. I've had my setup over a year. LOL

Eric@HolderdownPerformance

Rene G · Sep 15, 2012

powerstrokin15 said:
35/12.50s 20x10. stock height View attachment 9522

Eric@HolderdownPerformance

Very nice, I'm looking at adding some 3 spot N-Fab steps. Your truck looks really clean.

powerstrokin15 · Sep 15, 2012

Rene G said:
Very nice, I'm looking at adding some 3 spot N-Fab steps. Your truck looks really clean.

mine are for sale. that's an older pic, they're off now. only side pic I had.

Eric@HolderdownPerformance

cfdeng7 · Sep 15, 2012

How much u want for the nfabs eric?

powerstrokin15 · Sep 15, 2012

cfdeng7 said:
How much u want for the nfabs eric?

millions! LOL pm me so we don't muck up this thread any more

Eric@HolderdownPerformance

clayton · Sep 15, 2012

I had 35x12.5 stock for a while, like others said.

Ive got a brand new set of n fabs for sale, bought wrong ones they're for ext cab. Im also in Canada...