Tire/Wheel Selection Help Needed

Notorious6.0 · Jun 7, 2013

Planning on installing a 3.5 Readylift Stage 4 leveling kit on my '12 Superduty Crewcab 4x4. Wanting to run 20x12 wheels...what size tire should I or can I run? 325/60/20? 35x12.50x20? 35x13.50x20? 37s in these sizes? Rub at full lock is no biggie and no off-roading.

bigrpowr · Jun 7, 2013

Notorious6.0 said:
Planning on installing a 3.5 Readylift Stage 4 leveling kit on my '12 Superduty Crewcab 4x4. Wanting to run 20x12 wheels...what size tire should I or can I run? 325/60/20? 35x12.50x20? 35x13.50x20? 37s in these sizes? Rub at full lock is no biggie and no off-roading.

im considering similar an i wouldnt think of going narrower than 13.5 ... unles you like the really stretched look.

Motostroker · Jun 8, 2013

Who makes 35x13.50 R20? That would look sexy on them new rims

bigrpowr · Jun 8, 2013

Motostroker said:
Who makes 35x13.50 R20? That would look sexy on them new rims

im thining a 36/15.5 MT claw for me .. not sure who makes a 35/13.5 ..somebody has got to.

Motostroker · Jun 8, 2013

Found some. Toyo makes them!

powerstrokin15 · Jun 8, 2013

that's a fuel tire.. Toyo lookalike. gets horrible mileage

Sent reeming out the newly rebuilt Clifford

Motostroker · Jun 8, 2013

Friend of a friend told me it comes out the same factory. Don't know if that is true or not.

Coxey Diesel · Jun 8, 2013

Motostroker said:
Friend of a friend told me it comes out the same factory. Don't know if that is true or not.

Guy at swamps with the duramax told me his lasted like 7500 miles..

Motostroker · Jun 8, 2013

Coxey Diesel said:
Guy at swamps with the duramax told me his lasted like 7500 miles..

Run-Roh..... That's no good

Coxey Diesel · Jun 8, 2013

Motostroker said:
Run-Roh..... That's no good

And they were the 35x13.50's...

Motostroker · Jun 8, 2013

To the OP. I am going to run a 2.5 level with a 4 inch block. On 35x12.50 Toyos on some 20x10 Novakanes (4.75 backspace) . 2013 f250. Just throwing that simple idea out there since its a nice, clean look.

Coxey Diesel · Jun 8, 2013

Motostroker said:
To the OP. I am going to run a 2.5 level with a 4 inch block. On 35x12.50 Toyos on some 20x10 Novakanes (4.75 backspace) . 2013 f250. Just throwing that simple idea out there since its a nice, clean look.

You're gonna want 12's Drake. It's inevitable.

WHY NOT · Jun 8, 2013

Mickey Thompson ATZ's come in a 35x13.50. I had to trim some of my inner fender and a little bit of the factory flair to get them to clear with my 2.5" leveling kit and 20x10's. So I would Imagine you will have to do about the same with the 3" kit and 20x12's
Here is the 20x10's -25 offset and 35x13.50's on a 2.5" up front and 5" rear block look like.

Here is the little bit of trimming I had to do, they still rub every-once in a while too though, like if I pull over a curb to fast while turing

Notorious6.0 · Jun 8, 2013

Heres the wheels I want to run....

http://hostilewheels.com/KNUCKLES-Armor-Plate-w-6522.htm
H101-2012817047P PVD Chrome 20.0 12.0 8X170 125.20 -44

Nj67 · Jun 8, 2013

Motostroker said:
Friend of a friend told me it comes out the same factory. Don't know if that is true or not.

Yes. The way I understood it was fuel is a baby company of toyo to branch of into the truck world since toyo makes so many other kinds of tires. My buddy got a bad batch of mt's so he called and shipped them back and toyo sent him fuels

Sent from my iPhone using Tapatalk

CMCx2012 · Jul 5, 2015

WHY NOT said:
Mickey Thompson ATZ's come in a 35x13.50. I had to trim some of my inner fender and a little bit of the factory flair to get them to clear with my 2.5" leveling kit and 20x10's. So I would Imagine you will have to do about the same with the 3" kit and 20x12's
Here is the 20x10's -25 offset and 35x13.50's on a 2.5" up front and 5" rear block look like.

Here is the little bit of trimming I had to do, they still rub every-once in a while too though, like if I pull over a curb to fast while turing

This set up looks awesome!!!

Not to wake a dead thread, but the good ol' search function came to the rescue yet again as I set out to see some examples of my truck with the 35x13.50x20. I intend to make the jump from my Cooper 12.50's and I am thinking of going with a set of Toyo M/T's maybe, or I might give the R/T series a try, but the only problem is that the R/T's do not really look as bad ass.