Torque converter hot mode

TD-5

Member
Joined
Sep 12, 2013
Messages
284
Reaction score
2
Location
British Columbia Canada
H&S programming enters the torque converter HOT MODE much earlier than the stock programming.
Does the Hot mode converter LOCK & UNLOCK programming override the Tow/Haul mode as well as the normal mode?
I'm trying to write programming that locks the converter immediately shifting into 3rd & 4th in tow/haul mode with OD locked out. I have it so it will not shift into OD, but it appears to follow the HOT MODE settings no matter what I set the tow/haul figures at, Thus my conclusion, Hot mode overrides all other settings?
 

Attachments

  • converter lock hot mode.jpg
    converter lock hot mode.jpg
    319.5 KB · Views: 120

TD-5

Member
Joined
Sep 12, 2013
Messages
284
Reaction score
2
Location
British Columbia Canada
Thanks Mark, Being the 2-3, & 3-5 shifts are highly complex swap & syncronized shifts, is it even feasible to be attempting to lock the torque converter on shift completion with these shifts or am I looking for trouble?
 

ckrueg

Member
Joined
Sep 18, 2013
Messages
859
Reaction score
1
Location
Belding MI
Should be fine. Most tunes lock the converter from 2nd up. And my tune locks up in 3rd through od under moderate throttle.
 
Top