Reply to thread

Message: [QUOTE="Northwoods2002, post: 1295496, member: 14449"] You need to ohm our your solenoids and also make sure your shift cable is adjusted correctly. P0733 - 3-4 shift error because of shift solenoid A, shift solenoid B or internal transmission components. P0782 - 2-3 shift error because of shift solenoid A, shift solenoid B or internal transmission components. Both codes refer to your shift solenoids operating properly. Once you've ohm'd them I'd also drive it and make sure they're switching properly. Once verified, you can go into the valve body next. Solenoids should ohm out to 20-30 ohms each. A is pins 1 and 3. B is pins 1 and 2. [/QUOTE]

Verification

Random media

95_Bronco_conversion_pics_014

2011-05-25_07-27-13_250

Big_Red16

photo-2

capped

jumptruck

DSCF1101

Nate_in_all_his_Glory

Da Pumpkin Truk Facebook Gem

Latest posts

Won’t start issues
- Latest: psduser1
- Yesterday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Yesterday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Yesterday at 6:57 PM
6.7 Tech & FAQ
Y
2001 Ford F350 7.3 l powerstroke diesel windshield washer fluid reservoir
- Latest: Yojih123
- Yesterday at 12:15 PM
7.3 Tech & FAQ
s364.5
- Latest: htsummers22
- Saturday at 10:54 PM
Want to Buy

Members online

No members online now.

Total: 772 (members: 0, guests: 772)

Top