Reply to thread

Message: [QUOTE="stacked6.7, post: 1365576, member: 9938"] So I installed the shim kit yesterday. My lash was at .007 and after the shims were in I set it to .010. Using the shim kit also made install much smoother. I lost about .002 on each side because that the closest I could get the shims to the factory ones, and I'm happy with how it went in. A snug fit, but not near as hard as when I used the factory's. Which may have been part of the problem before. I also took the locker apart and found no damage. But after reassembly I hooked to a small trailer loaded with my zero turn and I think it's still binding a little. [/QUOTE]

Verification

Random media

king_ranch_steps

step_15

Lifetime warranty

2013-03-21_16-46-39_704

404497_3047082223674_457951947_n

excursion_bumper

IMG_20130428_141000_233

Tac 38

Extended

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

Total: 391 (members: 2, guests: 389)

Top