[/IMG]
Nov 3, 2013 #21 P.I.S_7.3 New member Joined May 24, 2011 Messages 70 Reaction score 0 Location TAMPA FL [/IMG]
Nov 3, 2013 #22 P.I.S_7.3 New member Joined May 24, 2011 Messages 70 Reaction score 0 Location TAMPA FL [/IMG]
Nov 3, 2013 #23 P.I.S_7.3 New member Joined May 24, 2011 Messages 70 Reaction score 0 Location TAMPA FL [/IMG]
Nov 3, 2013 #24 P.I.S_7.3 New member Joined May 24, 2011 Messages 70 Reaction score 0 Location TAMPA FL [/IMG]
Nov 3, 2013 #25 P.I.S_7.3 New member Joined May 24, 2011 Messages 70 Reaction score 0 Location TAMPA FL Ill have to get pics of the pistons when I get to the shop. Besides this for 300k on the motor the cylinders and crank look factory fresh. Still has nice cross hatch
Ill have to get pics of the pistons when I get to the shop. Besides this for 300k on the motor the cylinders and crank look factory fresh. Still has nice cross hatch
Nov 3, 2013 #26 Magnum PD Active member Joined May 18, 2011 Messages 9,566 Reaction score 7 Location VA Looks like a roller or rollers locked up.
Nov 3, 2013 #27 P.I.S_7.3 New member Joined May 24, 2011 Messages 70 Reaction score 0 Location TAMPA FL Would the piston contact cause damage to the lifter rollers? Or is this 2 seperate problems
Nov 3, 2013 #28 Magnum PD Active member Joined May 18, 2011 Messages 9,566 Reaction score 7 Location VA Two separate issues I think. But I'm not an expert.
Nov 3, 2013 #29 M m j Active member Joined Jan 13, 2013 Messages 1,225 Reaction score 0 Location BC Canada Eh! a good smack might crush the needles in the rollers nasty damage, means metal shavings everywhere
Nov 3, 2013 #30 T TyCorr New member Joined Jun 23, 2011 Messages 15,461 Reaction score 0 Is that a lube oil deficient condition that would cause that? How the hell was that not running so ****ty that you knew it was hurt? :shrug:
Is that a lube oil deficient condition that would cause that? How the hell was that not running so ****ty that you knew it was hurt? :shrug:
Nov 3, 2013 #31 P.I.S_7.3 New member Joined May 24, 2011 Messages 70 Reaction score 0 Location TAMPA FL Couldn't tell you buddy. Had no idea. Been doggin the truck pretty hard too.
