lincolnlocker
Well-known member
right on. way less geometry to figure out that way.
live life full throttle
god bless america and the farmer who feeds your fat ass
What have you done to your powerstroke today?
- Thread starter Daniel@RudysDiesel
- Start date
live life full throttle
god bless america and the farmer who feeds your fat ass
little luke
New member
Exactly. For no more money and work it will take over just a single bar its kind of a no brainer.
Ive got jig I use to test the length of the traction bars ive built to see if they will bind. Its just a 6' piece of 3/4 all thread with 2 3/4" nuts with 1" nuts welded perpendicular to each other. Tack the axle mounts, clamp the frame mounts, push the ass end down to the bump stops and lift till the back wheel leave the ground and watch for binding.
lincolnlocker
Well-known member
sweet
live life full throttle
god bless america and the farmer who feeds your fat ass
Cknox121
New member
Tom@BigTimeKustomz
Active member
Done sir.
dsberman94
Well-known member
Let the girlfriend drive home from dinner since I was having issues was my contact lenses moving around. Crappy pic because I snagged it quick when we got home before she could run.
cbf9703
New member
- Joined
- Mar 1, 2014
- Messages
- 5,596
- Reaction score
- 0
Looks like a bad wig on a dude to me... :shrug:Let the girlfriend drive home from dinner since I was having issues was my contact lenses moving around. Crappy pic because I snagged it quick when we got home before she could run.
Saw a small puddle under it when I got fuel at my normal station.... First time it's ever done this that I remember seeing.
Sent from my XT1254 using Tapatalk
Dirtclod
New member
Fried my PCM yesterday! Anyone have suggestions on where to buy one?
lincolnlocker
Well-known member
get ahold of airfish on here
live life full throttle
god bless america and the farmer who feeds your fat ass
6speedsd
New member
Finally drained the tank in preparation for the sump. Figured it's time to get that little project off the back burner.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
what year truck? Buddy has one for a 6.7
Cknox121
New member
Changed the oil, drained the water separator on the AD2, greases all the u joints and rotated the tires. Only 15k on these trail grapplers and they are less then half tread...
Sent from my cracked iPhone using Tapatalk
Sent from my cracked iPhone using Tapatalk
lincolnlocker
Well-known member
7.3
how often are you rotating the tires? please put better oil in that thing.. lolChanged the oil, drained the water separator on the AD2, greases all the u joints and rotated the tires. Only 15k on these trail grapplers and they are less then half tread...
Sent from my cracked iPhone using Tapatalk
live life full throttle
god bless america and the farmer who feeds your fat ass
SunsetFarms9530
Member
What's on the roof of the truck in the first picture? Looks like a GoLight.Changed the oil, drained the water separator on the AD2, greases all the u joints and rotated the tires. Only 15k on these trail grapplers and they are less then half tread...
Sent from my cracked iPhone using Tapatalk
Lmgrpowerstroke
New member
New oil pan and oil, coolant filter
Tore headlights apart to get ready for paint
Tore headlights apart to get ready for paint
Dirtclod
New member
My truck is an 01 7.3 auto. I thought I had one but it fell through. There's been a few to contact me thru email but I guess I have trust issues. I sent air fish a pm but no response. I'll call their shop in a min to see what they can do.
Powerstroke214
Active member
Cknox121
New member
15k lol. Got lazy on this set.
What oil do you recommend then?
Sent from my cracked iPhone using Tapatalk
