Wheel choices

[Goindownhole]

I'm currently in the market for new wheels.
I'm running 35x12.50 tires on my stock 20s, and want a hair wider wheels for more contact patch.

I've got the platinum white truck, so I'm thinking of a two tone black/machined wheel.

I was curious about how far 20x10s will stick out based on backspacing.

I'd rather they be flush with the fenders, but a hair of stick out is fine, so from -12 to -24 is what I would be looking for, correct?

Here are the three I'm looking at:
Fuel Throttle 20x10 black/machined
Fuel Full Blown 20x10 black/machined
BMF /SOTA Novakane 20x10 in death metal finish. (-19mm)

Does anyone have pics of these wheels on our trucks in these sizes and backspacing?

Thanks!

 

[strokin20]

20x9 SOTA Novakane with 0mm offset.



Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[strokin20]

Sent from my SAMSUNG-SM-G891A using Tapatalk

 

[Tom@BigTimeKustomz]

I can get you great pricing on the Fuels.

I'll have to edit later on from my phone and post pics of my setup. They are 20x10 Couplers, -24 backspace on 35's. Very minor trimming and they rub very little. Looks great!

 

[Jerrybizzle]

-12 or -24 offset willl stick out a couple inches. A nine inch wide with 0 offset will be close to fenders. Could even go with a slightly + offset.
I have 9 inch wide -12 offset wheels and 12.5 wide tires and they stick out a couple inches which is what I wanted. I'll add a pic shortly.