Wheel/tire/level

Bigwill0815 · Aug 16, 2016

Been searching and looking all over the web for about 2 weeks. Finally going to ask everyone here... So I have a 2015 F250 4x4 Larait and am looking at some 22x12" -44 offset and some toyo MT 33x12.50's (325) with a 2.5" level. Is this going to clear with minimal trimming? Currently have nitto exo grapplers on the stock 20's and they are great.
Thanks guys

Sent from my iPhone using Tapatalk

bigrpowr · Aug 16, 2016

its gonna need a decent amount of trimming IMO .

Bigwill0815 · Aug 17, 2016

Ment 305 terra G2 tires. If I can't run 22x12 I wanna run 22x10 with the 325

Sent from my iPhone using Tapatalk

David1089 · Aug 18, 2016

I'll be installing a leveling kit this weekend and 22x10 novakanes on 325's I'll be sure to take pics and let you know what I had to trim or not trim.

Bigwill0815 · Aug 18, 2016

Awesome thanks

Sent from my iPhone using Tapatalk

David1089 · Aug 18, 2016

Bigwill0815 said:
Awesome thanks

Sent from my iPhone using Tapatalk

No problem man!

c63 AMG · Aug 18, 2016

David1089 said:
I'll be installing a leveling kit this weekend and 22x10 novakanes on 325's I'll be sure to take pics and let you know what I had to trim or not trim.

Nice this is relevant to my interest! Subscribing.

Sent from my iPhone using Tapatalk

caribou6.7 · Aug 18, 2016

I just did 22x12 -44 and 35s! I had to space the bumper out 3/4in, very minimal trimming of the fender liners and I had to fold the pinch weld back a little bit. nothing crazy at all. I do have a RWD air dam on my bumper though so not sure how much different this would make?

David1089 · Aug 19, 2016

So. This is what I've found so far. I'll post pictures tomorrow. Anyways the wheel well liner and the inner bottom piece of the factory fender flare will have to be trimmed. And the bracket holding the valance will need minor trimming. That's what I've found so far. I'll post before and after pics as I work through it.

David1089 · Aug 21, 2016

After trimming

This was the only major trimming I had to do with the help of some flat black spray paint it looks like is should be this way. On the back of the fender well. Only minor cutting of the fender flare and the felt wheel liner. Sorry If the pics aren't perfect. I'm having problems with tapatalk.

David1089 · Aug 21, 2016

This is the back of the fender. Passenger side is cut close to the same way

c63 AMG · Aug 21, 2016

David1089 said:
I'll be installing a leveling kit this weekend and 22x10 novakanes on 325's I'll be sure to take pics and let you know what I had to trim or not trim.

These are 10.5 not 10 right?

Bigwill0815 · Aug 21, 2016

I said f it and ordered the 22x12 with -44 offset and toyo MT 33x12.5x22

Sent from my iPhone using Tapatalk

David1089 · Aug 21, 2016

c63 AMG said:
These are 10.5 not 10 right?

You are correct 10.5

David1089 · Aug 21, 2016

Bigwill0815 said:
I said f it and ordered the 22x12 with -44 offset and toyo MT 33x12.5x22

Sent from my iPhone using Tapatalk

Let's see pictures when you're done man!

Bigwill0815 · Aug 21, 2016

I will be posting them up. Went with a 2.5" front level and 2" taller rear block.

Sent from my iPhone using Tapatalk

David1089 · Aug 21, 2016

That's what I put on my truck. I'm sure I'll catch some flack for it but I just used the Readylift leveling kit. $300 on Amazon lol

Bigwill0815 · Aug 21, 2016

I got the pro ryde total was $400

Sent from my iPhone using Tapatalk

David1089 · Aug 21, 2016

That's a good deal!

Bigwill0815 · Sep 3, 2016

Got my wheel and tires. And leave installed. 22x12 gear alloy big block wheels 33x12.50 toyo m/t tires. Only had some run on my passanger side which I zip ties back and now we are all good.... Looks great