Latest activity
-
YYojih123 replied to the thread Fuel sending unit and wheel studs.What do you mean by front or rear wheel? Are you talking about in front of the wheel or behind the wheel for the gas tank location?
-
Powerstroke Cowboy replied to the thread Show & Go/Going to Try this Out combo Build.Such a little part, but what a mess it can be. Were they OEM? -
psduser1 replied to the thread Fuel sending unit and wheel studs.Drop the tank, disconnect the wiring where it plugs into the frame harness, and disconnect the fill and fuel hoses. The fuel hoses take... -
-
JJonnydime replied to the thread Show & Go/Going to Try this Out combo Build.Lifter ate a cam lobe.
-
Powerstroke Cowboy replied to the thread Show & Go/Going to Try this Out combo Build.Not good! Was it the cam or lifter?
-
YWhat is the process of removing a fuel sending unit out of a 2001 Ford F-350 dually that has the midship fuel tank and on top of that I...
-
JJonnydime replied to the thread Show & Go/Going to Try this Out combo Build.Well this happened. Motor is back at rcd to be gone through and have a new cam installed.
-
-
Thats probably why they smoke more. Used or not. 0% aren't ever perfect either. Just what they do. -
ju015dd reacted to Powerstroke Cowboy's post in the thread Tuning the 7.3 in current times with
Like.
If you do swap out injectors, give Jim @rosewood diesel a call. He will shoot you straight. I think he's a fan of the 160/80s and... -
Appreciate it, it is what it is nowadays.. At least there's some movement here. Lmaoaoa
-
ju015dd replied to the thread Truck slipping into 4th.First, how does the fluid look and smell? I just went through a v/b issue. I had to pull mine and repair the 2/3 valve. It was hung...
-
If you can, find a valve body that has all the fixes done to it. If your handy, you can rebuild the valve body yourself and add all new...
-
Powerstroke Cowboy replied to the thread Truck slipping into 4th.If you can, find a valve body that has all the fixes done to it. If your handy, you can rebuild the valve body yourself and add all new...
-
blackbeauty7.3 replied to the thread Truck slipping into 4th.I believe I performed it correctly. I’m leaning towards valve body being bad. -
Powerstroke Cowboy replied to the thread Truck slipping into 4th.Did you follow the specific process outlined for the rest? If it's bad solenoids in the valve body a reset will not help it.
Members online
No members online now.