Latest activity
-
JJoeDiesle replied to the thread Tuning the 7.3 in current times.They were forged rods up to 2000 and a couple of 01s ... then they all were PMR.. Mines an 01 with forged rods.
-
Crazy Canuck replied to the thread Tuning the 7.3 in current times.I believe Powdered Metal Rods up to about 2000 they had normal cast connecting rods. Then they went with powdered metal. -
What do you mean you are in the middle of a refresh? -
IINFRNL replied to the thread 7.3 LPOP Problem.What do you mean you are in the middle of a refresh?
-
6.0 Tech replied to the thread Ford 7.3 Passenger Bank Dead.Does this have a glow plug module, or a glow plug relay? Could be the module is bad, if it has one. Other thing to do would be to unplug... -
JI've got a question for you 6.4 guys. I bought my 09 f350 in 2015 I want to say. It had 66k miles on it, egr delete, dpf delete, intake...
-
Update: I cut the window for Hydra, and the problem is solved. The truck starts every time. I put 35 miles on it so far, and it is...
-
NNitroJoe replied to the thread Ford 7.3 Passenger Bank Dead.Update: I cut the window for Hydra, and the problem is solved. The truck starts every time. I put 35 miles on it so far, and it is...
-
Powerstroke Cowboy replied to the thread Show & Go/Going to Try this Out combo Build.Okay, I haven't had any experience myself with the problem. But, I've heard that the aftermarket HD ones have more problems than the...
-
JJonnydime replied to the thread Show & Go/Going to Try this Out combo Build.Yes I believe so. I don't believe there was an upgrade available when the motor was originally built
-
YYojih123 replied to the thread Fuel sending unit and wheel studs.It's three of the rear outer wheel studs
-
Powerstroke Cowboy replied to the thread Fuel sending unit and wheel studs.He's talking about the studs. Front wheel stud? Or rear wheel stud?
-
Powerstroke Cowboy reacted to psduser1's post in the thread Fuel sending unit and wheel studs with
Like.
Drop the tank, disconnect the wiring where it plugs into the frame harness, and disconnect the fill and fuel hoses. The fuel hoses take...
