cab is coming offin the next week

[GROSSpolluter]

Due to a oil leak. So im doing head studs and wanted to do batmowheels. My question is are they available yet and can you drive them on stock tune with dpf for smog checks?

 

[Jeff@Spartan]

The high pressure is not available. The low pressure wheel has been available for some time though. You'll be fine with them in stock form. It's just a wheel replacement.

 

[GROSSpolluter]

Is it worth doing just the one?

 

[Dzchey21]

The atmosphere is the only important one anyway. I bet there are minimal gains from the high pressure wheel

 

[Jeff@Spartan]

I think it showed a 30-35 HP increase on a stock truck (tuner, intake, exhaust, EGR delete) using IDP's X-race file. That's not bad if you ask me.

 

[bigrpowr]

I think it showed a 30-35 HP increase on a stock truck (tuner, intake, exhaust, EGR delete) using IDP's X-race file. That's not bad if you ask me.

id rather just swap the atmo for the tow power atmo, less work for more gain.

 

[Jeff@Spartan]

id rather just swap the atmo for the tow power atmo, less work for more gain.

I agree.

 

[GROSSpolluter]

Another question. Is it worth doing egr block off plates?

 

[White_monster]

You can swap the wheels without pulling the turbos if your curious. I've tried it too.

 

[bigrpowr]

Another question. Is it worth doing egr block off plates?

for you it is. the new cali smog law makes it so there is no way around the egr delete.

 

[GROSSpolluter]

for you it is. the new cali smog law makes it so there is no way around the egr delete.

Im just trying to figure out what to do with cab off....that's not crazy expensive. Will the blck off plates jack up my cyl pressure tho?

 

[GROSSpolluter]

Is the sinister block off kit ok?

 

[08BIGRIG]

You can swap the wheels without pulling the turbos if your curious. I've tried it too.

I did not know that you could bo the wheels with the turbos still on the truck. How time consuming was it?

 

[White_monster]

You can do the atmo wheel only. It was only a couple hour task from start to finish.

 

[GROSSpolluter]

You can do the atmo wheel only. It was only a couple hour task from start to finish.

That's the one in the front that the intake hose clamps to right?

 

[gman1]

That's the one in the front that the intake hose clamps to right?

Right.

 

[steedspeed]

Im just trying to figure out what to do with cab off....that's not crazy expensive.

I could state the obvious...

 

[Craig@MFI]

Both batmowheels will be avaliable by the end of next week

 

[GROSSpolluter]

Any numbers on swaping both wheels ?

 

[White_monster]

Any numbers on swaping both wheels ?

How would numbers be available if the wheels aren't even built yet. If they are the same size as tow power wheels I'd bet close to there numbers.