Recent content by GreasyFingers

I'm getting dozens of notifications from Tapatalk a day sense the update, somehow I missed the response. He's not picky on trim or bed but he's insisting on a manual. He's looking for something in fair to good condition under $15k. The market seems to be around $20k which is crazy Sent from...

Trying to help the brother in law find a 99-03 7.3 CC with a manual transmission. If you happen to come across one for sale, please pass it along. So far, all we can find are beat to hell or WAY over priced. Thanks Sent from my SM-N910V using Tapatalk

Here it is Build thread!! Warning, this thread is several years old and has the truck and it's complete the progression throughout the years. The newer modifications will be towards the end. http://www.cumminsforum.com/forum/3rd-gen-performance-parts-discussion/286792-build-up-lots-pics.html...

I'm helping a good friend spread the word on his truck. Pm me for more info. Thanks. Ok guys, "Big Angry" is for sale. 2006 Dodge Cummins 4 door 4WD. 5.9 Cummins, Garmons stage 4 with Fat Shaft and triple disc converter, 5" aluminum rear drive shaft and 3" front, ladder bars on rear axle, 6...

I priced them at Tousley. I believe it was $300 for the positive and knocking on $100 ea for the negatives iirc. But this was about 5 years ago. There are very few things I will buy at the typical parts houses, i.e. autozone, and especially oriellys. With tousley, I generally pay 10% more and...

Yes they will. They paid for themselves 10x over on the first use... well, had I had bought it, I borrowed them. My stock terminals were stretched and broken. I cut them off stripped the wire, crimped on standard copper lugs, and adhesive lined heat shrink. It saved me from buying $500+ set of...

If you're looking for a crimper that won't break the bank check these out. Google hydraulic crimper to find them. A buddy of mine has one of the top ones, I used them to fix my stock cables. They are rated at 10 tons and has dies up to 2/0. They're about $40. The second pic is the 16 ton...

Check MSC, they should have the carbide cutter you need Sent from my SM-N910V using Tapatalk

I brought the rpm's as high as 2,300 and moving at a snails pace, let off the throttle then exselerate again, gaining a little more speed, then would stop slipping and shift into second normally. I didn't hold the throttle continuously till it shifted. My tires are well worn so i initially I...

I was moving my 32' enclosed trailer with some odds and ends in it from moving. When parking the trailer the Trans would slip in first, but if I shifted from drive to first it would act fine. I unhitched the trailer checked the fluid. It looks clean and didn't smell burnt. I did a flush 40k ago...

This is what I use to purge the cylinders. I put together the diy compression tester whip, and added a ball valve and an air coupling. With the piston close to tdc, screw it in the gp hole, cover the injector cup with a rag and blast with air. It will blow out all the oil and fuel. If you pull...

Tom, you are awesome! The PDF is what I'm looking for! I checked out that page on that forum a while ago. The links don't work and every page on that sight takes FOREVER to load. BTW, On my way home from work (which is a ways from where I live) this morning I saw a junk yard I've never noticed...

Thanks for the info on the contour.

There's only a handful of junkyards within a reasonable driving distance. Most of them won't let you pull your own parts, a couple of them won't let you on the lot. You tell them what you're after or point it out and they send a highly qualified meth head to pull it. I guess its an insurance...

No I haven't. The last few times I've been at a junk yard they would look up the going price on the net and charge somewhere in the neighborhood of 80% and you get a whole 30 day warranty if that. Figure spending a day searching a couple junkyards, maybe find what you are looking for, might as...