Listing for a friend. Fresh rebuild II K16 Dragonfire
85% over. Just back from Industrial still in box. $2k
with core $2300 without. He'll cover shipping to
you. You cover shipping core back. Any questions
call or text Kevin 717-945-3820. Located in
Lancaster, PA.
I'm not gonna quote everybody that was discussing the urea usage vs power levels on the 6.7 Cummings but it seems they're like the 6.0's. Some are good some aren't. I know of one guy who says he has 6700 miles on his truck and DEF guage hasn't moved since he picked it up from the dealer but I...
Do these thangs need oil pressure to run? Some ol local boy was telling me the idi's have hydraulic lifters. That would explain not running on ether and most everything else.
I have a buddy from eastern PA with a '11 F450 that ordered a kit from you guys about 3 weeks ago when his stocker blew up. I told him to go with MPD or you guys and he chose you since your kit was about $1000 cheaper. He has called you a couple times wanting a straight answer on lead time...
I have the Epump feeding directly into the IP and I have fuel there but none comes out of the lines on the back of the IP while cranking. It just foams a little bit. Is there anyway that solenoid can be clicking without actually working? Also should fuel come out of the brass elbow on top of the...
I turned the key on, then went under the hood and pulled the wire off. Its definitely clicking. Is there any way it can come unhooked inside the pump? What has me puzzled is that this all started after doing right side only injector washers. It ran fine after doing the left side.
92 7.3 5speed sat for 6 months started and ran fine for 100 miles or so. Did the return lines and washers on the drivers side injectors. Ran fine. Did the same on the passengers side and it wouldn't start. My roommate bought it from the guy at this point. We put an electric lift pump off a...