Recent content by outacntrl

Seems like I remember reading a bunch of post about Chris's cams not making the power they should over on yellowbullet. He seemed to have a bunch of "reasons" as to why but people were swapping his cam out and picking up 50+ hp and a lot better driveability on NA combos. Sent from my SM-N950U...

I have a 05 6.0 switched from Delo5/40 to Jim's 8700. Was a little nervous about the cold starts but it starts just the same as when it had the Delo in it and is quiter, especially when warm. Only have about 500 miles on the oil so far though. Sent from my SM-N950U using Tapatalk

So what was the cause of failure? Sent from my SM-G935V using Tapatalk

Okay I'll give you a call later. Thanks! Sent from my SM-G935V using Tapatalk

Jim there is no grease zerk on mine. Also I was told the grease will attract dirt and act like grinding compound since there is no zerk to force clean grease in there. I've been told use a dry graphite spray. Sent from my SM-G935V using Tapatalk

Also interested in this for some uni ball's in some ttb beams along with the heims on the radius arms. Sent from my SM-G935V using Tapatalk

6.4 5R Sent from my SM-G935V using Tapatalk

What temp is safe to run? Sent from my SM-G935V using Tapatalk

Bump for a good seller. Converter has never been out of the box since it's been back from Phil. Sent from my SM-G935V using Tapatalk

Jimmy from lubrication engineers on here. I add a bottle to a full tank every 1000 miles or so. I also switched to lubrication engineers 5w- 30 oil. Jimdawg is his user name.

I bought a case of LX 2300 from Jim for my wife's ecoboost fusion.

I agree probably the controller. A friend of mine was having trouble with his 13 not having very strong brakes and with gain all the way up and slid all the way over I only measured 8 volts at the plug and when I checked another truck with factory controller it had battery voltage there and the...

I'm in Clearwater, SW of Wichita. Work in basically park city though.

I think someone else was having the same issue and ended up taking the whole setup off because they couldn't get it figured out. Sounds like it needs a check valve somewhere to keep the cooler from bleeding off.

If this is directed at me he was running a built trans tune from Gearhead per Elite, actually switched from Spartan to GH when trans was done. Not looking to argue about it just saying call Morgan and talk to him about his trans. Trans had maybe 30k miles on it. No passes down the track, no sled...