No loss of coolant, no fuel, no oil. The motor uses a lot of oil, doesn't leak, doesn't blow blue, compression is awesome, o-rings have been changed many times.
I had a low RPM miss appear on my engine after a slightly rough night of burnouts. After some troubleshooting, I found that the problem was with an injector itself. My injectors are 160/30 single shots with 9000 miles on them in an '03 engine. The solenoid is fine and it appeared to be...
I am currently in the process of finishing up my swap.
The fact that you don't have a complete equivalent truck to work with is going to make it slightly difficult. Wiring will be a nightmare if you're going to try to make everything work.
The only wiring I reused in the '06 was the cab...
I just bolted it into the '06 last week. I used the 6.0 crosmember. The 4r100 is about 1.5" longer than the 5r110 so the crossmember moves back to a different set of holes already in the frame.
The 6.0 firewall is pushed back about 1.5" so there is a lot more space behind the engine now. It...
Just adding to this thread that i am in the process of doing this swap. I have a gutted 2006 6.0 truck in great condition and a 2003 7.3 truck that needs way too much work all around.
It all looks like it will be pretty straight forward. The ABS pump looks like it might be the most...
it looks like it must be an exhaust leak from the manifold according to what everyone else is telling me which doesn't make sense to me. it's a loud squeak more like a rusty hinge for less than a second at about 1500rpm
For anyone that is having a hard time picking out the noise in the videos, it kinda sounds like an intermittent dry window wiper. It is much louder than the engine noise.
The noise is at low RPM's only.
Everyone has been saying over and over that it's that plate so we too k the plate off, checked the gasket and reinstalled it. No change and it doesn't sound like it's coming from that area. Everyone still insisted that it's that plate.
Pulled that plate off 2...
Because research showed that people had squeel noises after egr delete due to a leak there so we wanted to rule that out even though this is a low RPM noise.