Search results
-
Trans Issue; ZMBYKLR Trying to Get Ready for a Race
Call Phil, and see what he has to say.- Extended Power
- Post #2
- Forum: 6.0 Aftermarket
-
Fall/winter project
Front sub box test fitting. It will have the same granite top, and blue LED lighting, as well as the same cup holder set up as the back sub box. Rear box for reference...- Extended Power
- Post #43
- Forum: Truck Audio
-
Fall/winter project
Added some cooling fans to the box. Two are inside the box, behind the amps, pulling air under them, and pushing the hot air up to the other two fans which push the hot air out of the box. Fresh air inlet screens. Some color...- Extended Power
- Post #42
- Forum: Truck Audio
-
2003 pistons compared to 2004+ pistons
Oh, I know all about the longer glowplugs...:doh: I just don't see the point of buying a set of Pistons that cost an extra $450.00, when your running an aftermarket cam, and having the bowls de lipped anyways.- Extended Power
- Post #5
- Forum: 6.0 Aftermarket
-
2003 pistons compared to 2004+ pistons
What the hell is the difference? Apparently $425.00 is the difference on one vendors site for the 2003 pistons... I never knew there was a difference. Can someone esplain dis please...- Extended Power
- Thread
- Replies: 4
- Forum: 6.0 Aftermarket
-
DPC 2400 stall triple disk converter for sale
I personally haven't even run a stall this high. But, when I changed from a T3 X .76 exhaust housing, to the T4 X .91 housing...nothing happened until 2400 rpm. This happened with my new 69mm X 73mm SXE turbo. It was so responsive with the smaller t3 housing, and so laggy with the T4, it was...- Extended Power
- Post #14
- Forum: Aftermarket Performance
-
DPC 2400 stall triple disk converter for sale
Last bump before I send it back for a restall, and just keep it.- Extended Power
- Post #12
- Forum: Aftermarket Performance
-
DPC 13" Quad Disc with stock stall
PMd you again...- Extended Power
- Post #7
- Forum: Aftermarket Performance
-
BS or what?
I was under the impression that any conventional injector that was bigger than 285cc has issues with breaking the internal springs, etc. Some fella has a full set of brand new 350cc/100% CONVENTIONAL injectors for sale, with upgraded solenoids, and wants to go bigger... WTF? I thought anything...- Extended Power
- Thread
- Replies: 3
- Forum: 6.0 Aftermarket
-
WTB Stg 3 cam for 6.4L
When you find the cam, I have two sets of the Morel 6393 roller lifters...I only need one set with my cam. (Ordered a second set by mistake, and didn't send them back for a refund, or credit.) Let me know if your interested in them.- Extended Power
- Post #2
- Forum: Aftermarket Performance
-
DPC 2400 stall triple disk converter for sale
I live in Alberta...I see you do too...but I can also ship from Montana, as I go down there every other week.- Extended Power
- Post #10
- Forum: Aftermarket Performance
-
Best 58v ficm and tuning suggestions.
TAKE MY MONEY!!! :pimp:- Extended Power
- Post #14
- Forum: 6.0 Aftermarket
-
Best 58v ficm and tuning suggestions.
Jay, shoot me a price on those FICM tuners please. ....it will work with the Bullet Proof Diesel 58v 6-phase, correct?- Extended Power
- Post #11
- Forum: 6.0 Aftermarket
-
DPC 13" Quad Disc with stock stall
Sent you a PM.- Extended Power
- Post #3
- Forum: Aftermarket Performance
-
set of (8) 6.0 injectors $300
Text sent as well...- Extended Power
- Post #5
- Forum: Engine and Drivetrain
-
DPC 2400 stall triple disk converter for sale
No idea...never installed it after the restall. With my setup, I switched the secondary housing to a T4 X .90 divided housing, and didn't want to lose bottom end response. (Had a stainless steel T3 X .76 housing before.) But I have a different cam to install now, and won't need this converter.- Extended Power
- Post #8
- Forum: Aftermarket Performance
-
DPC 2400 stall triple disk converter for sale
$800.00- Extended Power
- Post #6
- Forum: Aftermarket Performance
-
DPC 2400 stall triple disk converter for sale
Bump to the front.- Extended Power
- Post #5
- Forum: Aftermarket Performance
-
DPC 13" quad disc / ats billet flex plate
From the text you sent, it sounded like you were looking for a lower stall than mine...so I didn't think you were interested.- Extended Power
- Post #6
- Forum: Aftermarket Performance
-
DPC 13" quad disc / ats billet flex plate
I need a quad with stock stall speed...I have a re-stalled DPC converter I was going to use, but swapping cams, and won't need it now. Still in the box from DPC... Maybe we can do some horse trading some how.- Extended Power
- Post #3
- Forum: Aftermarket Performance
Members online
No members online now.