Search results
-
Turbo Noise
I did my up-pipes (one was cracked) when I had my tranny out to put in my new clutch. Since I was already deleted, I got rid of the egr pipe at the same time. I just relocated the block off plate to where the pipe bolted to the up-pipe. I had to reuse the ebp tube simply because the wires that... -
What Do You Tow?
Moving a tractor yesterday It was a balmy -20 Celsius outside -
What Do You Tow?
Can I get a pic of where you mounted your switch and gauge? My wireless air POS decided to stop working so I need a new setup, something that is more reliable. Thanks -
-
manual locking hubs
I don't think so. 99-04 are held in with snap-ring, 05 and up are held in with screws.- qcfarmer
- Post #2
- Forum: Aftermarket Super Duty 1999 - Current
-
-
Sagging bad with gooseneck
I have the dual controller but like said, I use it for front and rear control.- qcfarmer
- Post #81
- Forum: 6.7 Aftermarket
-
SCT tuner no start
Just returned to stock and fires right up. Theft light blinking slowly when key is off and solid when WTS light is on then goes away and truck fires right up.- qcfarmer
- Post #10
- Forum: 6.0 Aftermarket
-
SCT tuner no start
When I load a tune (custom) and go to start the truck, the theft light stays on (solid) for about 40 seconds and the goes out. If I try to start the truck, nothing happens but the theft light blinks slowly. With the keys out, the theft light blinks slowly. As soon as I put the key in and turn it...- qcfarmer
- Post #9
- Forum: 6.0 Aftermarket
-
Turbo Noise
There are rubber gaskets inside the u-pipe as well. Maybe one shat the bed -
SCT tuner no start
I haven't really touched it in over a year. I originally had Wildman tunes and then tried Matt's. I just found the tuner and figured I would give it another go.- qcfarmer
- Post #4
- Forum: 6.0 Aftermarket
-
Turbo Noise
You could check the u-pipe that connects the two turbos(under the fuel cooler). The bolts the hold it to the valve cover on mine were loose/gone causing a boost leak between the two turbos. -
SCT tuner no start
I have an 03 excursion with a 6.0. A few years ago I bought an x3 with some custom tunes. When I uploaded the tunes the anti-theft light would come on and truck would not start. I tried different custom tunes with no change. I was frustrated so I put the tuner in the center console and forgot...- qcfarmer
- Thread
- Replies: 11
- Forum: 6.0 Aftermarket
-
In Remembrance of the 12/14 Tragedy
Done and bumping it up- qcfarmer
- Post #65
- Forum: Site Headlines and Suggestions
-
450 is getting the cab lifted
Any idea why pistons are cracking?- qcfarmer
- Post #41
- Forum: 6.4 Aftermarket
-
Heater Coolant supply hose leaking
Make sure you drain the coolant before unless you want a coolant shower. Pull metal clip out (a screwdriver may be needed to pry it out. Once the clip is out, just pull to separate. -
How many Miles & Hrs on your engine?
216000 kms and 4027 hours. Comes out to 53 kmh or 33 mph. This on a 450 that doesn't go more than 65 mph. -
Drivers VC
Got the broken one out. Just have to put everything back together. -
Drivers VC
I've got my drivers side VC off to replace the bolts/studs that hold the fuel cooler assembly. Of course there is one that broke in the head so the VC had to come off. Any thing I should do while I'm in there? Any thing I should check? Gp's, fuel rail, rockers? Thanks Here are the bolts from my... -
Anyone running 245/70/19.5s on stock F450 wheels?
Nice. Get some pics when you get them on.- qcfarmer
- Post #8
- Forum: 6.4 Aftermarket
