Search results

has anyone ran the zd-13s in a 03? I have a set I was going to put in my 2007 but ended up selling it so I have the extra set with a new harness, the wifes excursion needs a few I know they are like 1.3mm shorter.. do you think this will have any effect on it?

1996 f350 fummins 12 valve Truck runs and drives it's still what I would consider a "project" however Trucks a crew cab long box has a turnover ball, 174k on the body slightly less on the 12 valve 98 215 p pump 12 valve 024 delivery valves 5x.012 injectors 4k gsk kit Air dog 150...

I see a bunch of threads on this topic. Lots of air oil coolers, and alot of factory relocation kits. I guess my question why not use a larger plate liquid to liquid heat exchanger instead of a stock one? If you know of a thread can yall point me that way... I know you can get a 316ss 20 plate...

Just got the wife an ex it's an early 03 has 90k... I have a exhaust, coolant filter, studs, egr ******, banjo and blue spring, oil cooler, upgraded turbo drain, and a sct x4 coming for it I guess a couple questions it being an 03 do I need to worry about the hpop? If so should I replace it...

Looking for an excursion 03+ under 150k unless it's been studded and ******d. No gold color. Let me know what you got or know of where any are. Looking to move on one withen 2 weeks.

Well I put on a set of newer chevy cab lights still unsure about them but I think they look decent.

Anyone have a set laying around? Not looking for the whole core just the mounts.

I have 2 forbidden diesel sump kits new in the box I went a different route 200 for both or 110ea I'll cover the shipping

Truck is a project truck 1996 f350 crew cab long boxorginally a gas engine truck, 4.10 gears around 170k on the body, engine is a 1998 215 p pump has delivery valves in it. And 5x.012 injectors, new lift pump new valve springs, arp studs, 4k gov spring. Afc live, killer fowl pins Been taken...

I need to Find a speed signal for my PCS controller it has to be before any electronics, in other words the pulse signal from the pumpkin. Anyone know where such a monster is inside the cab? I'm about to run a wire all the way back to the rear end. Thanks

Like the title says looking for a set of single shots, need to be in known good working condition. Lmk what you got. Thanks

Replaced my hpop and my injectors, went to fire it up built low pressure oil then the hpo was building right below 500, stopped cranking fired it up and was missing, so I stopped it to cycle the gp's again I hear a hissing look under the hood oil is shooting out of the bottom of the hpop res...

Bought a 98 12v for the motor anyone looking for parts? Has some homemade bumpers front and rear(decent job actually powder coated) airbags, it's a reg cab 4x4 5 speed power windows and locks, gay flip out mirrors, afe stage 2 intake trucks is pretty beat I can send pictures If needed just pm...

Does anyone know where I can get just a compressor piston ring seal? Or maybe just a seal kit without bearings? Had an old kit laying around and that's the only thing missing..

i have an unfinished project. its a scat 408 kit has -16cc pistons(i believe ill have to measure to make sure), forged h beam rods, internal ballanced, its still sitting on the engine stand also have a set of 190cc intake runner aluminum heads with valves and procomp springs and pushrods, 2...

Fits harley tuning 14+, I bought this unit used and sold the bike before I ever used it. Bought it for 275 open to offers can ship out asap

I bought this for a controller when I was going to swap my manual trans for an auto. Plans changed so up for sale it goes has innovative tunes on it and it for behind a 12 valve This is the tcm2000 one so it will work on almost any trans if you buy a harness which is about 150-200 bucks

Any tricks to this guys? I fought this damn thing for about 2 hours yesterday, got it to spread about an inch apart It's an obs truck if it matters

Looking for a set of obs uppipes and collector, working hpop 15 or 17*. Single shot injectors. Would consider complete sd setup with uppipes turbo and drivers ide manifold. Also looking for intake spider or atleast the flagged elbow that goes on the turbo for the ic pipes

Want to trade for stage one single Shots or some low mileage single Shots we can work out a price depending on what you have. Also have the twin hpops still for sale and more than likely my irate 468 kit. Located in montana