Search results

Hey guys I've had some stuff come up and get need to sell this truck. Has 210,xxx on it transmission has new steels and clutches in it. Everything else looked good in it. Also the truck had a crack in coolant passage I had a friend weld it up who has welded a few cast blocks. I have another long...

I have a 1996 f250 I picked up about a month ago has clear title. I bought it cuz from what the owner of it made pretty clear was it ran good just had a couple leaks he couldn't find. Well I found the main one which he tried fixing with jb welded which is a crack in the block which has a drip...

I'm looking for a 7.3 block or complete engine for obs. Would really like something close to me in Cheyenne, WY. Would prefer a block that is all standard that won't need machined. Patrick

Hey guys just picked up a new to me 97 250 and wanting to eventually hit 500+hp and want to do a t4 setup hopefully this spring or summer. So I'm looking for write ups and threads on diy t4's. I searched some here and Googled didn't find a lot. Any help is appreciated. With suggestions on turbo...

So I'm not sure where to put this. But I picked up a 96 reg cab yesterday and the seat feels saggy on drivers side want to know where I can get a rebuild kit for it new cushions and if I can get springs. And also wanting to know if there are other options such as a 40/20/40 seat. Seat isn't...

Ok so looking for some info picking up a 96 f250 4x4 with the e4od that I believe will need rebuilt. I'm in school for diesel and will be able to rebuild the transmission in class. What is the best kit? I've been told and read in a few places that get the Ford kit. So I'd that what I should do...

Hi guys I have a 2002 7.3 that I've had issues with over a year just kinda have up for awhile but I need to fix it now it's putting a hold on other things in my life. I'm looking for someone to look at the truck maybe run ae on it for me. I don't have the funds to take it to a shop to have it...

I have a 2002 f350 for sale has a miss not not sure what it is but at this point I don't have the money or time to fight with the truck. I'm not really sure what the truck is worth at this point. It is a lariat 4x4 truck. Has some hail damage and 2 dents one large one on the bed and a smaller...

Ok so think I finally got my truck ready to go again after new injectors new valve cover gasket and unch. Get valve covers painted and back on then notice some oil on the rod for the exhaust valve then pull down pipe and notice oil in it. So pulling turbo. But is this something I can fix on a...

Looking for a stock GTP38 for my 02 7.3. Please let me know what you have need it to run on my tuck so no bent shaft or oil leaking. Patrick's iPhone5

All of this started after the truck died going around the corner from my house checked a few things found a guy with AE had him scan it was the ipr. I replaced the ipr. Then it started missing I figured it was from air in the system then 100 or so miles later still same thing going on. I now put...

Wtb working injectors for a 7.3 99-03 so AD's I know a couple of mine have gone out. Let me know what you have thanks. Patrick's iPhone5

Ok so truck died a couple weeks ago replaced ipr started now between 1500-2500 rpm have a miss/shutter. Just got these codes 1209, 0603, 1316, 1211, 0541 after removing and reinstalling injector solenoids on drivers side to look at condition. Here's a vid of what it's doing...

My truck died very little smoke while cranking changed CPS no difference. Was running rough before it died and won't start at all. But need to check duty cycle and and pressures if anyone can help please pm me. Patrick's iPhone5

Hey guys I'm looking for stock 99-03 for lights I have the wiring and all just need lights and brackets for some strange a PO took them off maybe cuz he had a plow on it. So if u have a set in good condition let me know and what u want for me. Patrick

So who all is planning on being there? I'll he going it'll be my third year going! But hopefully next year my forth year my truck will be coming and making some pulls drags and dyno runs! But whose going,whose gonna be running there trucks? Patrick

So I really want to build a 6-700HP dd 7.3. What are some power combos? What internally needs to be done rods pistons? Studs top and bottom. What valve springs and push rods? What turbo set up? What size injectors? Patrick

I need an AC line I found the reason my AC is now warm ic pipe rubbed a hole in it. It's the top one. I think the high pressure if u think u have one let me know. If needed ill get a pic of which one thanks guys! Patrick

As title says I'm looking for a reg cab 6.4 or 6.0 rolled or really rough with high miles is ok as long as its all there and runs well. Will be a project truck to go with my '77 150. But if its drivable ill drive it as a dd until I get ready to do the swap. It needs to have a straight frame if...

Ok so I wanted to double check will 05 and up wheels fit on my 02? My friend has a set he's going to sell and I've been told they won't fit but guys he knows at the tire shop say they will. There 17 inch wheels Patrick