Search results

Just like the title says: 18x10 Classic ll's, in pretty good overall shape. Lug nuts to fit a '02, but no center caps. I think the date on them is from 2002. Also Hoosier DR2 325/45 drag radials with maybe 6 passes on them. The only reason Im selling is because I have an OBS now. And Im not...

My parents have a 2000 Excursion with the V10. 4x4 90k miles. In the past year or so, we have been experiencing a no start issue. It only does it when it is hot. When the issue first arose, the "theft" light would flash quickly. We thought we had it figured out, that the PATS system had...

A no start issue only when hot? Its my truck in my signature. Just got my injectors back from Full Force, which are now 350/200's. It still won't start when hot. Starts up perfectly when cold other than a romp/choppy idle for a few seconds, then clears up. It has new IPR and ICP sensors, new...

So I've done some reading and I can't find a straightforward answer. So here goes: The truck is in my sig, I have just recently in the past week installed a Gen 3. My problems do date back before the install, but it seems the Gen 3 has amplified them. Also I will add, sometimes it starts fine...

I have for sale a Dual Stealth Hpop kit. These pumps work great, holy cow they woke my 250/200's up! This is by far my favorite mod, as going from a stock HPOP. I really like them, but it just fills up my valley too much, especially with the way I have my fuel lines mounted. And unless I redo...

~I have a friend with a 2000 F350 Powerstroke, stock auto, with 180,000 miles. He called this morning and said when the shifter is put in the "D" position, it feels like its starting in 3rd gear. ~He said it shifts fine if you manually shift it, up/down. There are no hard shifts, reverse works...

If I ordered your tunes from back when you were still with Beans, can I still get reburns through your company now that you have gone on your own? Or do I have to re-buy them now?

So... Good ones and bad ones. Post up your experience. I want know what I need to buy for my truck. Its a 2002 7.3. I bought a starter from Oreilly's (I know, be easy) with a lifetime warranty, for about $200. First one lasted 6 months. It literally broke in half. So I take it back, get...

Or so my AE says it is. The truck runs fine. But my AE is saying my coolant temperature is over 300*. The dummy gauge in the dash is right where it normally is, and no lights either. Engine oil temp is around 200ish. And also, I just checked it again, and after the truck sat for 16 hours, AE...

Okay. So as most of you know I blew my PMR motor up couple months back. Put in a 120k mile "takeout" motor from a 1999. Pretty straight forward. Swapped every sensor from the old motor to new motor. Along with some new parts. Injectors were reflowed by Full Force and checked out 100%. Bigger...

I have 4 almost brand new 325/50R20 (33x13.50) Mickey Thompson Atz's. They have around 6,000 miles on them. They are in perfect condition. No holes and no plugs. I am located in Eastern North Carolina, and I really don't want to ship these. But I can put these on a pallet and ship them, at...

So I did a 4x4 launch tonite with the new setup. I left pretty hard, and the truck felt amazing. It shifted great, and then the 3-4 shift slammed, and what sounded like a loud bang. Now I have no overdrive. The truck drives fine, the torque converter locks, and the tranny shifts fine. It just...

Can this be done? Im wanting to get rid of the drip associated with mine just being dumped under the truck. I have a '02 7.3 but I kinda figured this would pertain to almost all powerstrokes. So Im asking, why can't I weld a "bung" type fitting into my muffler, just like the one in the intake...

I'm wanting to Line X my valve covers, and of course my local dealer only sprays product rated to 200*. will this be sufficient? Or are they going to be hotter than 200*? Thanks.

So I was playing around in the truck tonite, pretty heavily. A couple WOT runs. Well immediately after the last one I realize my turbo sounds 10x louder. It literally sounds like a siren from a police car, or an ambulance. Its not constant, it only sounds like that from about 10psi to 20psi...

Matt, Im David Nicholson, you tuned my 2002 F250 with a 38R and 250/100's. I want to ask a question about tuning... I have noticed when I sled pull with this truck, I take off in second, and at WOT the smoke pours out, and the truck feels very strong, but when it shifts to 3rd gear, the...

Does anyone see anything wrong with this? Shouldn't this be close to $300 or more? I see its a mini pack leveling kit and comes with new track bar bracket. Is there something Im missing...

How do you tighten everything up? You can move my shifter way more than it is supposed to up and down when it is in gear. I've heard people talk about something that can be replaced to fix this slop. What is it? Any information is appreciated and part #'s would be awesome too! Thanks.

Will it work? Has it been done? I have a non wastegated 38R with the factory 1.0 housing. How much could or can be sprayed through this charger? Brian Jelich broke the shaft first time he sprayed his... So thats whats holding me back. Has anyone done it? Results? There's a duramax with EFI...

I have 4 Ballistic 2.63" Forged Chromoly Joints. *Bearing thru hole: 9/16" *Stud Diameter/Thread Pitch: 7/8" 14tpi *2 are left hand thread *2 are right hand thread *Nylatron Race: Billet/Solid *These are rebuildable I got these to make traction bars for my truck. They work great and did...