Search results

p0113 intake air sensor circuit high p0193 rail pressure circuit high seems simple enough right? I run through the prodemand trouble shooter for both codes. Both troubleshoot out to bad pcm. piece of cake. customer opts to put in a used pcm, fine with me. I get the used pcm install it and...

Ive got a customer with a 2011 c&c that bought a truck with a blown up engine. He bought a package deal used engine and trans with low miles out of what turns out to be a 2016. He wants the engine and trans both swapped out since the trans has alot less miles than whats in the truck. I...

ive got 2011 cab and chassis that i pulled the cab and worked on. Got it all back together and have no communication with the pcm or tcm. The scan tool will communicate with the hvac module, body control module, tpms module and iirc the abs module. Ive checked and cleaned all connections that...

Anyone had one start leaking oil into the exhaust? I hauled water friday and noticed a faint burnt oil smell when coming to a stop, but havent seen any burnt oil on the manifolds or drops/ puddles on the ground. Monday i went to haul water again and after it had idled 15-20 min to warm up...

Ive got complete 95 for sale, it is a 7.3 with just shy of 400k miles. I bought it a few years ago it had animal damage to some wiring harnesses, I thought i had everything to make it run. after swapping all the harnesses it still didnt run, being a 2wd i wasnt going to dump money into it. It...

anyone have any feedback on these? Looking at putting one on my 450 and wondered if it was worth the $$$. Have done a lot of searching and not much out there on these.

What is the thread size and pitch for the water pump hub? I have a truck here that had a special spacer on it so that the fan wouldnt interfere with the hydraulic pump and lines for the feed bed. Everything was seized up and wouldnt come apart, the hub broke off inside the adapter and our one...

Ive been tossing around the idea of swapping out my 6.0 for a 5.9 or 6.7 common rail. What is the preferred engine between the 2 engines and if I go the 6.7 route can the exhaust brake be made to work? Also how well does the 5r trans do behind it or is it still better to do a 4r swap? Im not...

Ive got a truck in the shop thats turned into a real mess. It came in needing an injector. However after the injector swap, it now has another gremlin that has come out. When you turn the key on the injectors buzz, wts light comes on just as it should but when you try and crank the truck over...

Ive got one farm truck that i work on that i cannot scan with my snap on scanner. What is needed to make this truck so that i can scan it? Its got power to the obd port as it powers up my bluetooth scanner, it just wont scan it.

Whats a reasonable priced place to get a reman? Local trans shop wants 2300-2400, ford wants every bit of that and jasper is right up there too, but i can find them online for 1500ish just dont know whos good to deal with and whos not. Junkyards are not an option, we are on #4 junkyard trans...

Ive been fighting my truck for probably a year now with this, maybe more and i cant figure it out. The truck runs 190-200 empty which is obviously not a problem. The problem comes when you are pulling a heavy load (16-17k lb 5er), accelerating and pulling hills, the temp sometimes just goes...

we put a used zf5 into a customers truck. we couldnt find a transmission with the exact same model, but we got one that had a similar production date and out of a 7.3. The only thing ive been able to determine being different is teh low gear ratio... It works as it should in 1-5, but about...

Theres so many kits out there i dont know where to start, what have some of you guys went with. I do want dims and brights, the brighter the better.

Ive got a truck that has a cold start issue. I believe its hpo related as the res is about an inch from being full and no oil pressure on the dash until the engine fires. I have had this happen before and the hpop has been the culprit, so i just swapped in a reman pump. Still the same...

ive got a 2000 6sp with esof troubles. The front drive shaft came loose and ripped the wiring harness out. We got the harness back together and now have no 4x4. I have mitchel prodemand and went through the trouble shooter, it pointed me towards a bad gem. swapped gem out of another like...

I want to make sure i am not missing something simple on my truck or maybe i shouldnt be worried at all i dont know. here's the truck stats 2003 f450 reman engine 8k miles new T stat new ford fan clutch mishi radiator mishi intercooler canned ts tune (yes i know, not the best) 430 gears It has...

I am installing a long block in a customers truck and cannot get this clutch off the old water pump. I have done everything just short of heating it up. If i heat this up to get it apart, should i install a new clutch on the new water pump? Yes i knew its left hand thread and yes I have the...

I have a truck that the blend door is not operating properly. I have eliminated teh control cable as it operates properly switching from hot to cold. The problem is that the blend door only moves for about the middle half of the transition from hot to cold. so no matter if you have it all the...

I have a 2000 f350, 6 speed trans that has had intermittent fuel issues and now the problem seems to be almost all the time now. ALL fuses are good, all relays that i can find are good. However, there's only 6-7 vdc at the pump. Ground at the pump is GOOD when ohmed to negative battery...