GreenMachine
Active member
Out of curiosity what do you charge?
I wanna go about this myself but with school and work and no space it's just not feasible.
05 finally went BOOM
- Thread starter GreenMachine
- Start date
Out of curiosity what do you charge?
I wanna go about this myself but with school and work and no space it's just not feasible.
jdc753
New member
I had mine done at Mass Diesel up in Bellingham, MA. Scott is a good guy and the guys spinning the wrenches know what they are doing, you could shoot him an email to get a quote, but that price of $2500 for labor sound pretty reasonable.
There is another shop a little closer to you in Assonet, MA that seems to have a good rep, I have no personal experience with them though. https://www.facebook.com/NathansGarage?ref=ts&fref=ts
Another good shop, but a little ways from home is Joe Wermer's (SICKS LITER on here) at Affinity Auto in Salem, NH. https://www.facebook.com/pages/Affinity-Auto-Repair/503100579703522
There is another shop a little closer to you in Assonet, MA that seems to have a good rep, I have no personal experience with them though. https://www.facebook.com/NathansGarage?ref=ts&fref=ts
Another good shop, but a little ways from home is Joe Wermer's (SICKS LITER on here) at Affinity Auto in Salem, NH. https://www.facebook.com/pages/Affinity-Auto-Repair/503100579703522
GreenMachine
Active member
Im going to give mass diesel a call since they aren't too far.
GreenMachine
Active member
jdc753
New member
There ya go, Scott has treated me quite well, even being a small $$ guy, and he is very responsive (at least through email, which is all I usually use)
Damn you!! :gethim:
oh well... KCCO
GreenMachine
Active member
Christmas!
Thanks RCD
Called Scott at MassDiesel and I'm waiting for a call back hopefully on Monday.
Thanks RCD
Called Scott at MassDiesel and I'm waiting for a call back hopefully on Monday.
Last edited:
GreenMachine
Active member
Just received an offer from a buddy to have full use of his shop for as long as i need, and he has a two post lift.
Decisions to make I guess. Am I completely nuts to try it? I am not a moron, and can swap parts, I'm just not a mechanic/genius like most of you.
Opinions?
Decisions to make I guess. Am I completely nuts to try it? I am not a moron, and can swap parts, I'm just not a mechanic/genius like most of you.
Opinions?
Chris.v
Member
- Joined
- Dec 24, 2012
- Messages
- 198
- Reaction score
- 0
If you have a quote for $1800 bucks I personally wouldn't even think of picking up my wrenches. Especially if your in school, sounds like your a busy dude. I'd give the headache to the ford tech, $1800 is a steal for you IMO.
Myself, I'd be doing the work, if nothing else for the learning experience. Though, I would want someone who has done the job on call or by my side to help out as well.
Damn you!! :gethim:
oh well... KCCO
My buddy did it for me (we were supposed to do it together, but the time never worked out correctly). Said he had ~ 8 hours total into the job and cut me a break on pricing. I was very grateful! Trust me, if you guys have seen my posts from the work/time I've had my truck at the Ford dealers... I've paid my dues and then some.
GreenMachine
Active member
Yeah, I remember you having a nightmare nonstop with dealers lol.
I would love to do it for the learning experience. Im just torn up.
Just got a really competitive price from Mass Diesel. Scott seems like a good and knowledgeable guy. Im thinking of dropping it to him this weekend coming up and just letting him handle it.
jdc753
New member
If you got a good price from Scott then I would go there. He has been around for years in the diesel world and has a nation wide rep (mostly with the cummins trucks) and knows his stuff, and all the guys working under him know their stuff too.
He took care of my truck back about 4 years ago when it gave up, its been solid ever since. I've gone back to Scott for my yearly inspections and if I need motor work again that I can't do it'll go back to Mass Diesel.
That you have!!
Mixedbreed
New member
1800$ for me. But that was a great deal when business was a bit slow. Think of other stuff to upgrade while the cabs off. Down pipe/ RR fuel system/ uppipes/ newer turbo drain line. Stuff like that
I had to go with a blocked off egr from bulletproof. I have smog tests so it couldn't just disappear. Lol.
I had to go with a blocked off egr from bulletproof. I have smog tests so it couldn't just disappear. Lol.
GreenMachine
Active member
Yeah, lol mine is going bye bye. It's at mass diesel now.
The only thing I want to do is a down pipe. Gunna have to order one up quick. Whatever cheapass did the exhaust before I got it did a 4" to the downpipe and left that alone.
dieselpower
New member
Nice looking truck! Out of curiosity, what tires do you have? I have the same wheels, but I like the looks of your setup better.
Stroker04
New member
Love the look of that regular cab looks good man!
GreenMachine
Active member
They are 305/55/20 goodyear duratracs. They're expensive as balls lol but insane in the snow, while being great on the highway.
And thanks guys, I love the regular cab but lack of space sucks. Just put in a chest box for some more storage. Poor truck needs a waxing also, it's been a long winter.
GreenMachine
Active member
New box. On sale from tractor supply so I said ***k it. Under $300 I believe.
All cleaned up right before she blew up.
Hooked up to my new enclosed.
Back when I was running Nitto mud grapplers.
Okay done picture whoring.
jdc753
New member
There ya go, should be in good hands!! I'd love to have a regular cab to go along with the crew cab.
I might have to sneak by this weekend and steel her tires :lookaround:
I might have to sneak by this weekend and steel her tires :lookaround:
GreenMachine
Active member
You still have time to get over there and steal em, this is turning into a cluster ***.
Members online
No members online now.