20% TO 40% OFF ON FORD OEM PARTS

UNBROKEN

Active member
Joined
May 18, 2011
Messages
2,788
Reaction score
1
Sean is there any update on this backordered thing?
Just curious.

7. Compartment LC5Z-78045A36-BB : $563.40 on national backorder...supposed to be released 11/4/22
 

sunrisefordparts

Active member
Joined
Jun 14, 2011
Messages
5,453
Reaction score
7
Sean is there any update on this backordered thing?
Just curious.

7. Compartment LC5Z-78045A36-BB : $563.40 on national backorder...supposed to be released 11/4/22
Hi,
It still has not shipped... Ford put a note on the part number on 10/31/22 that says "
26pcs expected to arrive at packager" So at least it is in the works...
 

kleake

Member
Joined
Jul 6, 2016
Messages
430
Reaction score
1
Location
Sapulpa, OK
Do you have a diagram showing the location (and components) of the transmission cooler on a 2020+ F250 Tremor? I am thinking of installing a winch behind the front bumper of my 2019 but my cooler is in the way. Looking into a possible relocation using Tremor components.
 

sunrisefordparts

Active member
Joined
Jun 14, 2011
Messages
5,453
Reaction score
7
Do you have a diagram showing the location (and components) of the transmission cooler on a 2020+ F250 Tremor? I am thinking of installing a winch behind the front bumper of my 2019 but my cooler is in the way. Looking into a possible relocation using Tremor components.


completely different design.. different water pump even...


1668192607048.png
 

sunrisefordparts

Active member
Joined
Jun 14, 2011
Messages
5,453
Reaction score
7
Can you get me the price on the cooler? I might be able to use that, and then plumb my existing coolant lines to it. Is 18495 just a bracket, or is there some other function since the lines go through that?
The workshop manual is calling it a coolant control valve...

your cost on the cooler is $132.00 and the valve is $67.65, but since it is controlled by the PCM it would not function...

1668198417633.png



1668198510630.png
 

kleake

Member
Joined
Jul 6, 2016
Messages
430
Reaction score
1
Location
Sapulpa, OK
The workshop manual is calling it a coolant control valve...

your cost on the cooler is $132.00 and the valve is $67.65, but since it is controlled by the PCM it would not function...

View attachment 186629


View attachment 186630
Interesting.... So it appears that is just a warmer, and not a cooler? So these do not actually have a cooler on them? (unless it re-opens if the trans starts getting hot?) On my 2019 it appears there is a thermostat of sorts at one end of the cooler/warmer that is near the front cross member, is this a similar setup but not controlled by the PCM? If so, this whole issue may be simpler than it appears.
 

sunrisefordparts

Active member
Joined
Jun 14, 2011
Messages
5,453
Reaction score
7
Interesting.... So it appears that is just a warmer, and not a cooler? So these do not actually have a cooler on them? (unless it re-opens if the trans starts getting hot?) On my 2019 it appears there is a thermostat of sorts at one end of the cooler/warmer that is near the front cross member, is this a similar setup but not controlled by the PCM? If so, this whole issue may be simpler than it appears.
From what i am getting, the cooler is sometimes a cooler and sometimes a warmer?
 

kleake

Member
Joined
Jul 6, 2016
Messages
430
Reaction score
1
Location
Sapulpa, OK
From what i am getting, the cooler is sometimes a cooler and sometimes a warmer?
That is what I would kinda suspect. I know these transmissions run hotter than previous with a stand alone cooler. On these, as the engine heats up, so does the trans. Good for warming it up, but bad when towing as it can get pretty toasty in the mountains. Can you look at the 2019 and confirm it just has a thermostat of sorts in the hose right at the cooler (not PCM controlled)? If so, I may be able to swap to the newer cooler, run my existing lines with thermostat back to that cooler. That would effectively make it all work the same as it currently does, just in a different location. I appreciate all of the info you have provided!
 

sunrisefordparts

Active member
Joined
Jun 14, 2011
Messages
5,453
Reaction score
7
That is what I would kinda suspect. I know these transmissions run hotter than previous with a stand alone cooler. On these, as the engine heats up, so does the trans. Good for warming it up, but bad when towing as it can get pretty toasty in the mountains. Can you look at the 2019 and confirm it just has a thermostat of sorts in the hose right at the cooler (not PCM controlled)? If so, I may be able to swap to the newer cooler, run my existing lines with thermostat back to that cooler. That would effectively make it all work the same as it currently does, just in a different location. I appreciate all of the info you have provided!
Yep, it looks like there is a thermostat used on the 6r140 trans for the diesel...

1668206594651.png
 

brewer

Member
Joined
May 18, 2011
Messages
191
Reaction score
0
Hi, looking for a thermostat and housing gasket for a 2011 Town Car. Looks to be RT1254 but wasn't fully positive that includes the thermostat housing gasket.
 

sunrisefordparts

Active member
Joined
Jun 14, 2011
Messages
5,453
Reaction score
7
Hi, looking for a thermostat and housing gasket for a 2011 Town Car. Looks to be RT1254 but wasn't fully positive that includes the thermostat housing gasket.
Hi,
Thermostat: 7L3Z-8575-E (RT1254) your cost is $27.28 ($45.09 retail)
gasket: F1VY-8255-A (RG-571) your cost is $1.74 ($2.87 retail)
+ shipping

thanks,
Sean
q736387
 

sunrisefordparts

Active member
Joined
Jun 14, 2011
Messages
5,453
Reaction score
7
Sean,

Can I get a price and availability on

VM2DZ-58521A03-P

Thanks sir.
Hi,
It has been replaced by a new number, but the warehouse still has 2 left with the old number which is a little cheaper...

VM2DZ-58521A03-P $374.55 + shipping

new number: VM2DZ-58521A03-U $420.53 + shipping

thanks,
Sean
q737261
 
Top