25% discount on ford parts to members

[Flexy04]

quote on superduty V code front springs. B code rear springs. U Bolts front and rear.
New nuts and bolts for the springs also. Thanks!!

 

[sunrisefordparts]

quote on superduty V code front springs. B code rear springs. U Bolts front and rear.
New nuts and bolts for the springs also. Thanks!!

for the rear springs are there any blocks being uses or just leafs on the axle?

 

[Flexy04]

Blocks in rear 4 inch

 

[eastern]

I do need the wire harness and rear back up sensors for 2017 . want to install in my utiity body.

 

[sunrisefordparts]

I do need the wire harness and rear back up sensors for 2017 . want to install in my utiity body.

just the harness on the bumper directly hooked up to the sensors? could you get me the last 8 of your vin

 

[sunrisefordparts]

Blocks in rear 4 inch

heres the quote

 

[eastern]

VIN- HEC59425. I need from ford oem plug on frame to sensors, as well as gromets that will hold sensors. I know I will have to do some fudging to make them work since OEM bumper is curved and I am installing in flat bumper. Utility co. tagged oem plugs on frame for me.

 

[sunrisefordparts]

VIN- HEC59425. I need from ford oem plug on frame to sensors, as well as gromets that will hold sensors. I know I will have to do some fudging to make them work since OEM bumper is curved and I am installing in flat bumper. Utility co. tagged oem plugs on frame for me.View attachment 46999

well the vin doesn't want to work for me can you shoot me the full vin? sorry for the back and forth.

 

[eastern]

1FT8W3DT1HEC59425

 

[sunrisefordparts]

1FT8W3DT1HEC59425

sensor harness list $27.35 sell $19.69
sensor retainers list $8.05 each sell $5.80 each, possibly the center 2 sensors on the oem bumper have the flattest mounting surface and would work for all locations of the aftermarket bumper.
q#474256

 

[eastern]

K guess you send me pay pal invoice?

 

[Preston_leslie]

Will be ordering the head kit shortly. Also need price on passenger side bedside for 03 short bed shipped to 37912

 

[sunrisefordparts]

Will be ordering the head kit shortly. Also need price on passenger side bedside for 03 short bed shipped to 37912

cant do shipping on the sheet metal, to much risk of damage during transit.

 

[Lugger007]

2012 f250 6.7
-Line from windshield washer fluid tank to each sprayers and spray nozzles on hood
-plastic tail gate cap without step
-fuse box cover for fuse box under hood
-power steering pump, is a rebuild kit available or just replace?
Thank you


Sent from my iPhone using Tapatalk

 

[jngreen]

Just placed an order online. I wasn't sure if I get the same discount but wanted to place the order today anyway to get it on the road tomorrow. I ordered part number 7T4Z-3A713-A. Order 32829462

Thanks,

Josh

 

[107stroker]

we offer 25% discount on over the counter parts purchases and online orders to all forum members. and special pricing on filters. you can send us an email at [email protected] or post request here. you also can call 909-822-8736 ask for brittian or kevin.

thanks
Jim Cockerham
parts director
Sunrise Ford fontana and North Hollywood

909-434-0473 xt 2120

Im in the market for a ptm grill for a 2008 f250. what is your price on this and can i get it in an oem color. oxford white. thanks
my contact number is (910)232-7110

 

[griz700rocket]

2011 F-250 single cab 4x4 without rear helper springs.
Looking to change from the stock 2in leaf spring blocks to the F-350 3 5/8th blocks.
So I'll need the right block, left block and 4 u-bolts to go along with them.
Already have the nuts and everything else.

 

[sunrisefordparts]

Just placed an order online. I wasn't sure if I get the same discount but wanted to place the order today anyway to get it on the road tomorrow. I ordered part number 7T4Z-3A713-A. Order 32829462

Thanks,

Josh

sorry didn't see this message till this am, you part is going out today we had to order it in from ford as for the discount you ended up getting a better deal as the website had the pricing way to low.

 

[sunrisefordparts]

2011 F-250 single cab 4x4 without rear helper springs.
Looking to change from the stock 2in leaf spring blocks to the F-350 3 5/8th blocks.
So I'll need the right block, left block and 4 u-bolts to go along with them.
Already have the nuts and everything else.

does your truck have the factory overload spring?

well im an idiot just read back and actually seen that you said no overloads

 

[sunrisefordparts]

2012 f250 6.7
-Line from windshield washer fluid tank to each sprayers and spray nozzles on hood
-plastic tail gate cap without step
-fuse box cover for fuse box under hood
-power steering pump, is a rebuild kit available or just replace?
Thank you


Sent from my iPhone using Tapatalk

here ya go