CAT35niner
New member
I'm putting my compound kit up for sale. I have my eyes set on another set of turbos that'll be better for me. If there's no interest then I will probably just keep them. What I have is a early design MPD 66/88 non vgt setup. Everything included will be:
MPD stainless steel log style manifolds with up pipes.
Old style turbo pedestal with 66mm Borg Warner turbo rebuilt and balanced by Barder about 1500 miles ago. Billet wheel installed at the same time. Oversized turbo drain for the 66. No excessive play in shaft. Has 360* thrust bearing in it also.
88mm forced inductions turbo. Has about 15k miles on it. No excessive shaft play. Turbo comes with v-band intake custom made aluminum intake made by Shane(whitemonster). Filter included.
All necessary mounts, hoses and piping. I made up all new oil feed hoses to the turbos using Russell hose and fittings. Phenix AN fittings in the turbos. All exhaust pipes are wrapped with titanium header wrap. Both turbos have black turbo blankets on them. The downpipe comes with a custom blanket on it.
Comes with a single JGS 50mm wastegate and manual regulator.
Custom AC line that goes to the ac compressor to clear the turbo.
If the buyer is local to me I would like trade passenger side inner fenders and passenger side valve cover. If not the buyer will have to cut their inner fender to clear the downpipe and weld a bung into the valve cover for the turbo drain. This kit is designed to fit around an elite dual fueler kit. Everything is in perfect working condition. For everyone that knows me I don't beat on my truck. It's made 936hp with this setup with the wastegate set right. I've messed with it since and haven't redynoed it. I've spent countless money on this kit to make it right for my liking. It is powder coated black with blue flake. The kit will not come with cold side pipe since my has been managed to clear the radiator and I wouldn't sell it the way it is. I'm looking to get $5,000 for the complete kit but I'm open to offers. I'm more then wiling to ship it. Local buyer will be better of course. But buyer will pay for shipping if need be and please understand that I need atleast a week to get it off the truck and ship it. I plan on putting the truck down the first week in November after my vacation to pull the engine to reseal an oil leak I have. So everything will definitely be off then. Please pm for any more details. If I'm forgetting anything I'm sure I think of it and post it.
MPD stainless steel log style manifolds with up pipes.
Old style turbo pedestal with 66mm Borg Warner turbo rebuilt and balanced by Barder about 1500 miles ago. Billet wheel installed at the same time. Oversized turbo drain for the 66. No excessive play in shaft. Has 360* thrust bearing in it also.
88mm forced inductions turbo. Has about 15k miles on it. No excessive shaft play. Turbo comes with v-band intake custom made aluminum intake made by Shane(whitemonster). Filter included.
All necessary mounts, hoses and piping. I made up all new oil feed hoses to the turbos using Russell hose and fittings. Phenix AN fittings in the turbos. All exhaust pipes are wrapped with titanium header wrap. Both turbos have black turbo blankets on them. The downpipe comes with a custom blanket on it.
Comes with a single JGS 50mm wastegate and manual regulator.
Custom AC line that goes to the ac compressor to clear the turbo.
If the buyer is local to me I would like trade passenger side inner fenders and passenger side valve cover. If not the buyer will have to cut their inner fender to clear the downpipe and weld a bung into the valve cover for the turbo drain. This kit is designed to fit around an elite dual fueler kit. Everything is in perfect working condition. For everyone that knows me I don't beat on my truck. It's made 936hp with this setup with the wastegate set right. I've messed with it since and haven't redynoed it. I've spent countless money on this kit to make it right for my liking. It is powder coated black with blue flake. The kit will not come with cold side pipe since my has been managed to clear the radiator and I wouldn't sell it the way it is. I'm looking to get $5,000 for the complete kit but I'm open to offers. I'm more then wiling to ship it. Local buyer will be better of course. But buyer will pay for shipping if need be and please understand that I need atleast a week to get it off the truck and ship it. I plan on putting the truck down the first week in November after my vacation to pull the engine to reseal an oil leak I have. So everything will definitely be off then. Please pm for any more details. If I'm forgetting anything I'm sure I think of it and post it.
Last edited: