Air filter help (big power)

HOSS-06

New member
Joined
Feb 4, 2013
Messages
50
Reaction score
0
Location
Ontario, Canada
Hey everyone,
Looking for feedback on what you guys use for high flow air filters. At the moment I have a AFE system but it does not flow enough air. Pics would be great if you have them.

Thanks guys.
 

HobbyStock62

New member
Joined
Dec 20, 2012
Messages
483
Reaction score
0
Location
Mpls, MN
What do you have done? Unless you got a massive yirob and quad cocaine injection then an aeg intake will do just fine. Still drunk from family holiday so if my spelling isn't the best the. Trig will know why.
 

kdogg85

New member
Joined
Nov 24, 2011
Messages
200
Reaction score
0
Don't know your definition of big power, but my wife's truck has an afe pro guard 5. Hasn't choked out yet. The setup is just an elbow with the filter on it.
 

Mixedbreed

New member
Joined
May 4, 2012
Messages
1,536
Reaction score
0
Location
Laramie, Wy
What do you have done? Unless you got a massive yirob and quad cocaine injection then an aeg intake will do just fine. Still drunk from family holiday so if my spelling isn't the best the. Trig will know why.

LOL. Quad cocaine injection. Classic!!




I am pretty sure the after market stuff flows a lot. I have a S&B but I don't have the big power.
 

Big&dirty

New member
Joined
Feb 17, 2012
Messages
60
Reaction score
0
Who makes quad cocaine injection for the 6.0 my truck would love that so would my track time lmfao
 

peixinho

New member
Joined
Sep 9, 2013
Messages
111
Reaction score
0
No intake in the world is gonna make big power.

I am still running the stock dirty air filter making around 600hp
 

HOSS-06

New member
Joined
Feb 4, 2013
Messages
50
Reaction score
0
Location
Ontario, Canada
Haha that's awesome!

Well I have 350/150 injectors, dual oil, Ported heads, ported intake manifold, 404 lift cam, shorty style header, ext. ext.. The turbo is about equivalent to a 73mm single. custom made. should flow just under 1600cfm that's the math not sure what the actual is.
All I know is at about 3/4 throttle it has to much vacuum and actually suck the factory filter minder in about 60 percent! this also causing me to pull oil through the turbo seal.

I say big power without numbers because I'm not one to toot my own horn, I'll only say an actual number after I run it on the Dino. Until then use your intuition ;-)
 

HOOV3R

New member
Joined
Dec 25, 2011
Messages
3,684
Reaction score
0
Location
Central PA
Haha that's awesome!

Well I have 350/150 injectors, dual oil, Ported heads, ported intake manifold, 404 lift cam, shorty style header, ext. ext.. The turbo is about equivalent to a 73mm single. custom made. should flow just under 1600cfm that's the math not sure what the actual is.
All I know is at about 3/4 throttle it has to much vacuum and actually suck the factory filter minder in about 60 percent! this also causing me to pull oil through the turbo seal.

I say big power without numbers because I'm not one to toot my own horn, I'll only say an actual number after I run it on the Dino. Until then use your intuition ;-)

Equivalent to a 73 as in 73mm inducer? S300 or s400 base? Standard or race cover? Helps to know a little info
 

Pizza pig

In the Brig (Banned)
Joined
Jun 4, 2011
Messages
3,715
Reaction score
0
Location
MD
Need a big AFE filter

4e6yga5a.jpg
ubutanap.jpg



Hellen Keller sent this?
 

HOSS-06

New member
Joined
Feb 4, 2013
Messages
50
Reaction score
0
Location
Ontario, Canada
What intake are you currently running with a 5" compressor inlet?

Right now its an AFE filter and housing with a custom 5" pipe to connect to turbo. And like stated its not working properly..

Thanks guys for the feedback and some pics , right direction. Have to rectify it sooner then later.
 

HOOV3R

New member
Joined
Dec 25, 2011
Messages
3,684
Reaction score
0
Location
Central PA
Need a big AFE filter

4e6yga5a.jpg
ubutanap.jpg



Hellen Keller sent this?

Know the pn for that? Wouldn't mind switching to that filter.





Right now its an AFE filter and housing with a custom 5" pipe to connect to turbo. And like stated its not working properly..

Thanks guys for the feedback and some pics , right direction. Have to rectify it sooner then later.

Get in touch with Matt a Cutting-Edge for a custom stainess intake like Greg has. I run one also, super nice piece.
 

HOSS-06

New member
Joined
Feb 4, 2013
Messages
50
Reaction score
0
Location
Ontario, Canada
Know the pn for that? Wouldn't mind switching to that filter.







Get in touch with Matt a Cutting-Edge for a custom stainess intake like Greg has. I run one also, super nice piece.

How does he do that without having the turbo and pedestal to match up to?

This is a early pic of it.
993451_10151819502220849_276021105_n.jpg
 

08BIGRIG

New member
Joined
Nov 26, 2011
Messages
1,814
Reaction score
0
Location
WI
Get a larger air filter like the one in the above post. AFE makes a Pro Guard 5 that is huge. If you have the room for a larger filter, get the largest one that you can fit and you should be good to go.
 

Latest posts

Members online

No members online now.
Top