Lets See Your 6.4 Under Hood Eye Candy

[blk350on20s]

Probably came from the same place that the ones in my truck came from.

Don't know if I could ever spend $600 on a degas bottle.

I'm right there with ya Erik.

 

[Beechperformance]

DPC setup.

New setup.

 

[WoodBoy]

I've seen a few of these. What is that pipe that runs around the vgt? from turbo to turbo?

The black pipe? The intake airflow goes from the atmospheric to the hp and then from the hp to the hotside pipe

 

[JrStroker]

The black pipe? The intake airflow goes from the atmospheric to the hp and then from the hp to the hotside pipe

Well I mean I know that much.. guess I asked the question wrong. Is it an upgraded pipe or something? Doesn't the stock pipe go under the vgt ?

 

[Matt]

Well I mean I know that much.. guess I asked the question wrong. Is it an upgraded pipe or something? Doesn't the stock pipe go under the vgt ?

On stock style turbos it goes down low. That isn't a factory atmo charger and the vgt has a larger compressor cover as well.

 

[BFT]

On stock style turbos it goes down low. That isn't a factory atmo charger and the vgt has a larger compressor cover as well.

:whs:

Well I mean I know that much.. guess I asked the question wrong. Is it an upgraded pipe or something? Doesn't the stock pipe go under the vgt ?

That pipe is specific for this turbo setup from elite diesel which are high power turbos (62mm VGT/ 76mm BB precision turbo.
The set up you are thinking of is probably the high power X (like what webb06 has) which is a bigger wheel and factory compressor housig on the VGT (59mm) and the precision BB 76 which has a cast wheel if I remember correctly

 

[JrStroker]

Ahhhhh Haaa! Now the gears are turning. Sounds good men. Thanks!!

Also are you all painting or powdercoating these pieces?

 

[webb06]

:whs:


That pipe is specific for this turbo setup from elite diesel which are high power turbos (62mm VGT/ 76mm BB precision turbo.
The set up you are thinking of is probably the high power X (like what webb06 has) which is a bigger wheel and factory compressor housig on the VGT (59mm) and the precision BB 76 which has a cast wheel if I remember correctly

Tow power x for me.

 

[sideactiondiesel]

triple turbo kit..

http://powerstrokearmy.com/forums/attachment.php?attachmentid=18770&stc=1&d=1373563198

Ac still in working condition .air cleaner piping is almost done. Leaves fender support in and not cut .

 

[jdgleason]

I'd post mine in here, but it's stock LOL

 

[Wayne]

http://powerstrokearmy.com/forums/attachment.php?attachmentid=18770&stc=1&d=1373563198

Ac still in working condition .air cleaner piping is almost done. Leaves fender support in and not cut .

what size is the atmo? looks nice

 

[Mike@MPD]

Miss this setup

 

[webb06]

http://powerstrokearmy.com/forums/attachment.php?attachmentid=18770&stc=1&d=1373563198

Ac still in working condition .air cleaner piping is almost done. Leaves fender support in and not cut .

Where's the build sheet on this beast at?!

 

[sideactiondiesel]

what size is the atmo? looks nice

Thanks Wayne! and it is a 80

Where's the build sheet on this beast at?!

There is no build sheet yet .... doing testing for as of right now. stock fuel and stock upper half . stock trans . . I will know more after this weekend might get time to go to strip and see what we can do. :fordoval:

 

[powerstroked08]

Wow that looks like fun:evil. Tires beware!

 

[08BIGRIG]

Finally got it all done hay bud. Looks really nice. I am tuned in for results man.

 

[bluedevilslax]

I give single one you guys props for the work that you all have done to your trucks. All fo them are not only clean looking but every single one is innovative. I hope to be in the thread one day.

 

[sideactiondiesel]

Thanks jerry! Yep almost finished even no need to cut fender well either can't tell a thing outside the truck. I lost your # when I ran over my phone on a test drive . Shoot me a text or a call out something man .
Hope everyone likes it .

 

[bigrpowr]

Thanks jerry! Yep almost finished even no need to cut fender well either can't tell a thing outside the truck. I lost your # when I ran over my phone on a test drive . Shoot me a text or a call out something man .
Hope everyone likes it .

your atmo is prolly a great choice for the combo! look forward to results!! good luck !!!

 

[08BIGRIG]

Thanks jerry! Yep almost finished even no need to cut fender well either can't tell a thing outside the truck. I lost your # when I ran over my phone on a test drive . Shoot me a text or a call out something man .
Hope everyone likes it .

Will do bud. I will talk with ya soon.:blitzed: