need some input from 2011+ owners with 20x10's

[1stock13]

I have 35X12.50 at's on stock platinum wheels at the moment, I'm installing a 1.5 in spacer lift this weekend, my f350 rides high stock, but I want to make sure I can get a 20x10 -19 wheel under it with minimal rubbing. I want to know if anyone has done this, I'm guessing with the spacer I'll be around the same height as a 250 with a 2 -2.5 in kit. Any pics and input would be appreciated. Also, I would like to know the weight and offset of the stock platinum wheel. I'm pretty sure it's a 20x8.5 but I could be wrong.

 

[sootie]

250 or 350 has nothing to do with the front spring height. it matters what the truck was optioned with. check your door sticker front axle ratings. if it is 6000, they are the tallest springs avail from ford.

 

[1stock13]

250 or 350 has nothing to do with the front spring height. it matters what the truck was optioned with. check your door sticker front axle ratings. if it is 6000, they are the tallest springs avail from ford.

I was wondering what that meant, yes that's what I have. It rides stiff at all get out. I bought my truck used and I find out new things everyday about it.

 

[WHY NOT]

you should be fine. Maybe have to pull back the inner fender liner or trim a little bit

 

[OuchThatHurt]

3" rough country lift. 0 rub.
20 x10 XD hoss
35x12.50

 

[1stock13]

3" rough country lift. 0 rub.
20 x10 XD hoss
35x12.50

what's your offset?

 

[Dzchey21]

yep you will just barely need to trim the bumper bracket and the inner fender should be solid.

 

[Tom@BigTimeKustomz]

I have 20x10, -24 offset and had to trim the bumper bracket and inner fender.

 

[OuchThatHurt]

I believe -24.

 

[1stock13]

yep you will just barely need to trim the bumper bracket and the inner fender should be solid.

Whats your offset as well?

 

[Dzchey21]

I'm not sure. I am pretty sure the back space is 4.75. I think that's near -24 ish

 

[SunsetFarms9530]

20x10 fuel w/ -24 offset w/ 35/12.50 Toyo mt
1.5" leveling kit...new springs not spacer
Kept the stock blocks in the rear.

Had to trim the inner fender out a little bit. Nothing major and nothing metal just the black inner liner.

 

[12 6.7 & 03 6.0]

I have 20x10 with -24 offset with 3 1/2 leveling kit/lift. I had to trim inner fender quite a bit and will most likely trim bumper support. Rubs occasionally when turning and I hit a bump just right.

 

[1stock13]

20x10 fuel w/ -24 offset w/ 35/12.50 Toyo mt
1.5" leveling kit...new springs not spacer
Kept the stock blocks in the rear.

Had to trim the inner fender out a little bit. Nothing major and nothing metal just the black inner liner.

just installed the exact same setup, just trying to scrape up the money for the wheels now.