pull/racer build

[06f250powerstroke]

well figure Id start a thread on this new project, since I wrote off my 07 harley a few months ago I since then pick up a 07 Lariat with tan Interior

So since I just happened to have a set of harley davidson seats kicking around lol I decided to swap out the interior (picss coming ) Black seats with tan interior has a unique look I think

Now for the fun stuff, A real nice guy in alberta gave me a pretty wicked deal on his race motor and nadp trans i couldnt pass up lol

going to stay with a single turbo for now to match up with the monster hybrids that just so happens got left in the motor as of right now i will be using a s475 with race cover 75/83/1.00

going to swap axels in from old truck 430 gears with locker up front and tru trac in rear

I will try to keep the tread updated as it comes together heres a pic of the motor and upipes mounted

 

[ThreeFitty]

sweeeet should be a fun build

 

[06f250powerstroke]

big thanks goes out to shawn ellerton for his help so far top notch guy

 

[andrewsteelerford05]

What for injectors are you going with.

 

[JGman141]

What for injectors are you going with.

I'm curious about this too

 

[06f250powerstroke]

400cc hybrid

 

[JGman141]

400cc hybrid

Yea that's alot of fuel, the s475 can't even come close to cleaning those. What size nozzle?

 

[andrewsteelerford05]

Yea that's alot of fuel, the s475 can't even come close to cleaning those. What size nozzle?

I don't have a problem cleaning the 350/100s. Mine are getting the upgraded 7mm plungers and also made into hybrids. Jesse going to make them bigger then 350s when they are done. Said would have no problem on the street, jesse has got his tuning spot on now.

 

[06f250powerstroke]

new wheel set up came in !!!

 

[06f250powerstroke]

fuel rampage 2 peice with 325/60/20 duratracs

 

[06f250powerstroke]

just waiting on the down pipe flange from smeding diesel

 

[06f250powerstroke]

flange showed up today

has anyone seen the bd diesel tap shifter that came out for the 6.4 was wondering if it could work on a 6.0

 

[strokin6L]

You'd think it'd work for the 6L....same trans.

 

[Cutting-Edge Diesel]

They control the trans differently tho. Last I heard they were working on a 6.0 version

 

[swinky]

I don't have a problem cleaning the 350/100s. Mine are getting the upgraded 7mm plungers and also made into hybrids. Jesse going to make them bigger then 350s when they are done. Said would have no problem on the street, jesse has got his tuning spot on now.

Can you even move 350 with a 100 nozzle?

 

[Jeremy @ No Limit]

new wheel set up came in !!!

Das nice!

 

[andrewsteelerford05]

Can you even move 350 with a 100 nozzle?

Yeah it moved real good with jesse warren custom tune he put in it. Jesse ran them in his shop truck for a while. But mine are being made into hybrids with the 7mm plungers upgrades and nozzle being changed. Jesse never said what the nozzles are going to be now. He just said that they will have more flow.

 

[06f250powerstroke]

would it just be the tcm that would needed to be changed out for a 6.4 one for that to work or is that even possible?

whats everyones thoughts on a BDS 4" lift?

 

[06f250powerstroke]

Just got off the phone with bd diesel about a tap shifter for the 6.0 looks like there in development right now could be released early summer no guarantees tho

 

[brownbros-ben]

I had a hard time sending those wheels to ya once they came in I wanted to keep them for my truck lol