School me on EGR kits.

[taterthedog]

Supposed I wasn't fond of the EGR valve and it's associated coolers. What's out there to help me "relocate" these parts. When does a wastegate become a good idea? I'm going to be running 5" straight exhaust with a 4" down pipe, intake kit, and Eric's tunes via an off road livewire. Pretty sure I'm going to add a 71mm LP turbo when the cab is off for studs and o-rings this spring. Some pictures would help me see stuff better too. Thanks.
-Brad

 

[SEABEE08FX4]

We have a kit that will remove the EGR valve and restrictive factory elbow and replace it with a higher flowing polished aluminum elbow, the kit also includes the coolant plugs, blocker plate and misc gaskets and hardware. You can see it at the link below. PM me if you have any questions.

Thanks

http://performancetruckproducts.com/6-4egr-ptp-ford-6-4l-egr-cooler-delete-kit

 

[A.thoma]

ruddys make a wastegated kit alot of guys on here recommend that when going to the 71mm charger. i just did a regular delete got all my parts off ebay and its doing fine running stock charger and fuel

 

[jdgleason]

Elite has a super simple egr delete kit, along with the 71 you're looking for as well. I'd give them a call and get all your stuff together

 

[tbsimmons]

Look up no limit also. He makes some nice parts also. All the EGR delete kits will be pretty close to the same. Just pick he company that gives you that warm and fuzzy feeling.

 

[A.thoma]

Yea I here great things about elite ill be getting my tow powers and all the goodies from there soon enough

 

[Wayne]

imp:
https://www.elitedieselengineering.com/category/1455/EGR-Components/1.html

This will get you started. No limit pipes are here:

https://www.elitedieselengineering.com/product/14240010/No-Limit-IC-Pipes/

and turbos:

https://www.elitedieselengineering.com/category/4449/Atmosphere-Turbochargers/1.html

 

[bigrpowr]

for the no limit stuff, feel free to contact me directly if you have any questions.

 

[taterthedog]

This is an older post. Went with NoLimit cold side pipe and EGR delete. The EGR cooler delete stuff I think is coming from Elite. 5" MBRP exhaust and 4" down pipe. Got it all from Paul at Complete Performance.

 

[taterthedog]

for the no limit stuff, feel free to contact me directly if you have any questions.

Did this. Answered all my questions. Anyone with any questions, hit him up.

 

[RedRice589]

All i can say is do it! I just didmy EGR delete this morning started at 8:00 and a cpl minor breaks topped off the coolant and slapped the fender on at 3:30. I did my ThermostTs once i was in there (main reason i went ahead and did the delete. Worth it a hundred percent! Intake elbow next week! Just be ready to swear a little and some scuffed up knuckles! Best mod i have done yet!

 

[A.thoma]

All i can say is do it! I just didmy EGR delete this morning started at 8:00 and a cpl minor breaks topped off the coolant and slapped the fender on at 3:30. I did my ThermostTs once i was in there (main reason i went ahead and did the delete. Worth it a hundred percent! Intake elbow next week! Just be ready to swear a little and some scuffed up knuckles! Best mod i have done yet!

I would get a CAC pipe along with the elbow it makes a noticeable difference in how fast you build boost!!

 

[RedRice589]

Haha all in due time but yes that's next trying to get ahold of a no limits intake setup for cheap lol i'm a cheap arse...

 

[RedRice589]

All in due time i'm working on getting the no limits stuff but i'm cheap! Lol

 

[A.thoma]

All in due time i'm working on getting the no limits stuff but i'm cheap! Lol

from a fellow cheap ass i tell you EBAYYYYYYYYYYYYYYYY lol its the **** i got all my stuff from flo pro the intake elbow is $139 and the cac is also $139 shipped to my door the cac pipe has 2 bungs :redspotdance:

 

[taterthedog]

Better off supporting one of the fine sponsors on this site. Can't get that kind of customer service on eBay. It'll be worth it.

 

[A.thoma]

id take $100 cash over with no service anyday it comes straight from dealer all parts were here in under 4 days

 

[RedRice589]

I just like the cleaner look of the no limits stuff. But i'm an avid ebay shopper myself. I'll wait and see if i can get a better deal if i buy an innercooler as well. Sometimes all it takes is a call and good conversation with good people. Worth a little extra money to me.

 

[A.thoma]

No limits does have a good looking product I have nothing against it at all I'm just on a tight budget until I can spen about $6k at elite charger, fuel, some other goodies

 

[Wayne]

Two big things to keep in mind when considering flo-pro vs No Limit on the intercooler piping is that No Limit piping is compatible with our twin pump kits, and not much else is. the other thing is the manifold inlet angle. There's serious turbulence for the air to make the angle to supply the rt bank, and a couple big power trucks have cracked rt side pistons due to heat caused by lack of air on that side only. We've never seen that problem with No Limit stuff where it enters the intake at the straightest angle possible. A penny saved now is sometimes a penny earned, but other times, it's a couple thousand dollars lost in repairs.