Stock Height F350 pics?

[dmistak617]

I'm wanting to get 20x12s with 33" tires and I'm afraid they will look too small. Plan on keeping it stock height for now and then maybe leveling it. Any pics would help a ton!! Thanks! 2008 F350

Sent from my iPhone using Tapatalk

 

[Stroked777]

Just for reference, my truck is stock hieight with a 1.5 inch leveling kit up front, and the tires are 35x13.5R18 and IMO the look too big, next set of tires I am gunna plan on 33x12.5r18. Tires right now do rub a little on the inner fender at full left lock, Idk the off set of the rims

 

[RedRice589]

Monks truck would apply.... He'll show up soon. He has 22x14's I think though

 

[powerstroked08]

35- 12.5-20

 

[Jonnydime]

Stock height 33-12.5r20 20x10 wheel

Lowered 3" rear 1.5-2" front 33-13.5r18 18x10 wheel

 

[dmistak617]

I just got a call back from my local wheel place saying that I can't run 20x12s on stock height.. I'll have to lift it.. Anyone care to help me out? Do I actually need one?


Sent from my iPhone using Tapatalk

 

[sootie]

20x12's with a 305/50/20 wont need much trimming to clear on stock height.

 

[RedRice589]

A 33/12.50 on a 20x12 will require trimming and still may rub at times

 

[bft blue oval boys]

Here's mine; completely stock up front, dropped with 1" blocks in the rear to level it. Mine is a 250 though so not sure of the difference. Wheels are 20x12 -44 tires are 305/55. Did some trimming but just for good measure so it wouldn't hit on a bump while turning. If you go with a 305/50 you shouldn't have to do any trimming

Sent from a Cummins plant, driving a Powerstroke, with a TDI on the side!

 

[bft blue oval boys]

Also, mine doesn't scrub at all with the little bit of trimming and the liner zip tied. If you want pics of that let me know and I'll get some when I can't

Sent from a Cummins plant, driving a Powerstroke, with a TDI on the side!

 

[RSK]

I run 22x10.5 with -25mm offset with 33's tires look small stock height. They come with 33's stock and they look small. I'm lowered 2" in the front and will do the back by the weekend they still look small....

Stock height

Stock height. 33x12's too small...

Lowered 2" in the front.

 

[bft blue oval boys]

I just got a call back from my local wheel place saying that I can't run 20x12s on stock height.. I'll have to lift it.. Anyone care to help me out? Do I actually need one?


Sent from my iPhone using Tapatalk

Go pick your truck up and take it to someone that knows what they are doing. Or just show them pictures of the countless trucks on this forum that run that same setup (including mine)

Sent from a Cummins plant, driving a Powerstroke, with a TDI on the side!

 

[RSK]

Go pick your truck up and take it to someone that knows what they are doing. Or just show them pictures of the countless trucks on this forum that run that same setup (including mine)

Sent from a Cummins plant, driving a Powerstroke, with a TDI on the side!

Just tell you don't care if it rubs just mount them, and you will deal with that's what i did. Mine rub the inner fender liner. Honestly who cares if they touch that....

 

[sootie]

just ziptie the liner back-problem solved.

 

[bows08]

Stock height, stock wheels 33x12.50's

Leveled with 35's

Jeff

 

[dmistak617]

Also, mine doesn't scrub at all with the little bit of trimming and the liner zip tied. If you want pics of that let me know and I'll get some when I can't

Sent from a Cummins plant, driving a Powerstroke, with a TDI on the side!

If you could id appreciate it!


Sent from my iPhone using Tapatalk

 

[bft blue oval boys]

If you could id appreciate it!


Sent from my iPhone using Tapatalk

Not sure why it looks so ragged in the pic but it really doesn't in person lol. It's 100 degrees outside so I wasn't gonna stick around to get a better picture.

As you can see, we just straightened the fender out where it normally turns in and then zip tied the fender liner

Sent from a Cummins plant, driving a Powerstroke, with a TDI on the side!

 

[dmistak617]

Not sure why it looks so ragged in the pic but it really doesn't in person lol. It's 100 degrees outside so I wasn't gonna stick around to get a better picture.

As you can see, we just straightened the fender out where it normally turns in and then zip tied the fender liner

Sent from a Cummins plant, driving a Powerstroke, with a TDI on the side!

Awesome, thanks for the post!



Sent from my iPhone using Tapatalk

 

[bft blue oval boys]

No problem

Sent from a Cummins plant, driving a Powerstroke, with a TDI on the side!

 

[RedRice589]

Shiz looks unprofessionally cut like some shiz.....