Truck Pull Questions??

[bdm1981]

I'm going to hook up the truck tomorrow night so I have a few questions for you guys that do this quite often. Truck is bone stock. 3.31 gears. All other info is in my sig. Stock tires. What gear should I pull in and should it be in 4hi or 4low??? Any input would be appreciated.

 

[08Monster]

4low, 3rd gear, strap the front end down if possible, ease into it and roll out 15ft or so, and floor it. Proceed to hold it floored unless you get a bad bounce or stop moving.

Sent from my XT1585 using Tapatalk

 

[bdm1981]

Thanks bud! Appreciate it!

 

[Jomax]

Best psi for tires?


Sent from my iPhone using Tapatalk

 

[bdm1981]

Good question?? Tire psi??

 

[Jacob @ No Limit]

20ish I believe

 

[PDT1081]

20ish I believe

Maybe on the front. 60-70 in the rear. Fronts also depend on if you have a way to air back up to drive home. If not, don't go any lower than you feel comfortable driving home with.

 

[Jomax]

So 20psi front 60psi rear?


Sent from my iPhone using Tapatalk

 

[PDT1081]

So 20psi front 60psi rear?


Sent from my iPhone using Tapatalk

For a first time hook, I'd probably go with 35 and 70. You don't want your rear tires to squat too much. You'll lose hitch height.

Can you hang weight and block suspension?

 

[bdm1981]

Thanks for the input guys! Gonna see how it turns out tonight!

 

[bigrpowr]

4low, 3rd gear, strap the front end down if possible, ease into it and roll out 15ft or so, and floor it. Proceed to hold it floored unless you get a bad bounce or stop moving.

Sent from my XT1585 using Tapatalk

What this guy said Ben.